Makita DCS551 Instruction Manual

Also see for DCS551: Instruction manual Instruction manual Instruction manual Instruction manual Manual

Contents

Makita DCS551 Instruction Manual Manual pdf 9 page image

9To maintain product SAFETY and RELIABILITY, repairs,any other maintenance or adjustment should beperformed by Makita Authorized Service Centers, alwaysusing Makita replacement parts.OPTIONAL ACCESSORIESCAUTION:• These accessories or attachments are recommendedfor use with your Makita tool specified in this manual.The use of any other accessories or attachments mightpresent a risk of injury to persons. Only use accessoryor attachment for its stated purpose.If you need any assistance for more details regardingthese accessories, ask your local Makita Service Center.• Carbide-tipped blades• Rip fence (Guide rule)• Thumb screw M5 x 20• Hook• Hex wrench 5• Safety goggle• Makita genuine battery and chargerNOTE:• Some items in the list may be included in the toolpackage as standard accessories. They may differ fromcountry to country.Noise ENG905-1The typical A-weighted noise level determined accordingto EN60745:Sound pressure level (L pA ): 78 dB (A)Uncertainty (K): 3 dB (A)The noise level under working may exceed 80 dB (A).Wear ear protection.Vibration ENG900-1The vibration total value (tri-axial vector sum) determinedaccording to EN60745:Work mode: cutting metalVibration emission (ah,M): 2.5 m/s 2 or lessUncertainty (K): 1.5 m/s 2ENG901-1• The declared vibration emission value has beenmeasured in accordance with the standard test methodand may be used for comparing one tool with another.• The declared vibration emission value may also beused in a preliminary assessment of exposure.WARNING:• The vibration emission during actual use of the powertool can differ from the declared emission valuedepending on the ways in which the tool is used.• Be sure to identify safety measures to protect theoperator that are based on an estimation of exposure inthe actual conditions of use (taking account of all partsof the operating cycle such as the times when the toolis switched off and when it is running idle in addition tothe trigger time).For European countries only ENH101-18EC Declaration of ConformityMakita declares that the following Machine(s):Designation of Machine:Cordless Metal CutterModel No./Type: DCS551Conforms to the following European Directives:2006/42/ECThey are manufactured in accordance with the followingstandard or standardized documents:EN60745The technical file in accordance with 2006/42/EC isavailable from:Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium23. 10. 2014Yasushi FukayaDirectorMakita, Jan-Baptist Vinkstraat 2, 3070, Belgium