Makita DDF343 Instruction Manual

Also see for DDF343: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

2ENGLISH (Original instructions)SPECIFICATIONSModel DDF343 DDF453Steel 10 mm 13 mmWood 25 mm 36 mmWood screw 5.1 x 63 mm 6 mm x 75 mmCapacitiesMachine screw 6 mmHigh (2) 0 - 1,300No load speed (min -1) Low (1) 0 - 400Overall length 192 mm 214 mmNet weight 1.4 kg 1.6 kgRated voltage D.C. 14.4 V D.C. 18 V• Due to our continuing program of research and development, the specifications herein are subject to change without notice.• Specifications and battery cartridge may differ from country to country.• Weight, with battery cartridge, according to EPTA-Procedure 01/2003END004-4SymbolsThe following show the symbols used for the equipment.Be sure that you understand their meaning before use.읭 Read instruction manual.읭 Only for EU countriesDo not dispose of electric equipment orbattery pack together with householdwaste material!In observance of European Directive2002/96/EC on waste electric andelectronic equipment, 2006/66/EC onbatteries and accumulators and wastebatteries and accumulators and theirimplementation in accordance withnational laws, electric equipment andbattery pack that have reached the endof their life must be collected separatelyand returned to an environmentallycompatible recycling facility. ENE034-1Intended useThe tool is intended for drilling and screw driving in wood,metal and plastic. ENG905-1NoiseThe typical A-weighted noise level determined accordingto EN60745:Model DDF343Sound pressure level (LpA) : 70 dB (A) or lessUncertainty (K) : 3 dB (A)The noise level under working may exceed 80 dB (A)Model DDF453Sound pressure level (LpA) : 72 dB (A)Uncertainty (K) : 3 dB (A)The noise level under working may exceed 80 dB (A).Wear ear protectionENG900-1VibrationThe vibration total value (tri-axial vector sum) determinedaccording to EN60745:Work mode: drilling into metalVibration emission (ah,D) : 2.5 m/s 2 or lessUncertainty (K) : 1.5 m/s 2ENG901-1• The declared vibration emission value has beenmeasured in accordance with the standard testmethod and may be used for comparing one toolwith another.• The declared vibration emission value may also beused in a preliminary assessment of exposure.WARNING:• The vibration emission during actual use of thepower tool can differ from the declared emissionvalue depending on the ways in which the tool isused.• Be sure to identify safety measures to protect theoperator that are based on an estimation ofexposure in the actual conditions of use (takingaccount of all parts of the operating cycle such asthe times when the tool is switched off and when itis running idle in addition to the trigger time).CdNi-MHLi-ion