1012 3012706Raise the arm part of the spring and then place it in therecessed part of the brush holder with a slotted bitscrewdriver of slender shaft or the like.1012707Use pliers to remove the carbon brush caps of thecarbon brushes. Take out the worn carbon brushes,insert the new ones.12006304Make sure that the carbon brush caps fit into the holes inbrush holders securely.Reinstall the rear cover and tighten two screws securely.To maintain product SAFETY and RELIABILITY, repairs,any other maintenance or adjustment should beperformed by Makita Authorized Service Centers,always using Makita replacement parts.OPTIONAL ACCESSORIESCAUTION:• These accessories or attachments arerecommended for use with your Makita toolspecified in this manual. The use of any otheraccessories or attachments might present a risk ofinjury to persons. Only use accessory orattachment for its stated purpose.If you need any assistance for more details regardingthese accessories, ask your local Makita Service Center.• Drill bits• Screw bits• Hook• Grip assembly• Makita genuine battery and charger• Rubber pad assembly• Wool bonnet• Foam polishing pad• Battery protectorNOTE:• Some items in the list may be included in the toolpackage as standard accessories. They may differfrom country to country.1. Hole2. Carbon brushcap1. Carbon brushcap1. Arm2. Spring3. Recessed part