Makita DHG181ZKX06 Instruction Manual

Also see for DHG180: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

6 ENGLISHASSEMBLYAttaching and detachingaccessoriesThe heat gun can use with accessory or without theaccessories according to various of heating purpose.Attaching the accessory— Choose the appropriate nozzle according to theheating applications.— Push the fitting end of the nozzle onto the heatingnozzle.MOUNTING THE CORRECTACCESSORY (IF APPLICABLE)Shape anddescriptionExampleGlass protectionnozzleProtect windowswhen strippingframesDrying the putty on the window flameRemoving putty from the window framewith the scraper (optional accessory)Wide-slot nozzleFor heating spreadover wider areaHeat packaging for heat shrink filmsReflector nozzle Heat shrinking for heat shrink tubesBending of resin tubeReduction nozzleFor heating concen-trated over smallareaPaint stripping with the scraper (optionalaccessory)Overlap weldingnozzle(Optionalaccessory)Patching a vinyl sheet with the pressureroller (optional accessory)Solder sleevesreflector(Optionalaccessory)Heat shrinking for heat shrink tubesWelding nozzle(Optionalaccessory)For heating concentrated over smallareaWARNING: Ensure the power tool is switchedoff and battery cartridge is removed from thepower tool before attaching the accessories.Attaching the accessories with switch on or batterycartridge attached may cause the risk of accidents.WARNING: Make sure to attach the accesso-ries securely. Otherwise the accessory may fall offaccidently and cause burn injury.Detaching the accessoryTurn the front cover in the direction of the arrow in theillustration, the accessory will be ejected. This allowsyou to remove nozzles without touching them while theyare still hot.Fig.2