2ENGLISH (Original instructions)SPECIFICATIONSModel DHP470 DHP480Concrete 13 mm 13 mmSteel 13 mm 13 mmWood 38 mm 38 mmWood screw 10 mm x 90 mm 10 mm x 90 mmCapacitiesMachine screw M6 M6High (2) 0 - 1,550 0 - 1,550No load speed (min -1) Low (1) 0 - 400 0 - 400High (2) 0 - 23,000 0 - 23,000Blows per minute Low (1) 0 - 6,000 0 - 6,000Overall length 199 mm 199 mmNet weight 1.7 kg 1.5 kg 1.8 kgBattery cartridge BL1430 / BL1440 BL1815 / BL1815N BL1830 / BL1840Rated voltage D.C. 14.4 V D.C. 18 V• Due to our continuing program of research and development, the specifications herein are subject to change without notice.• Specifications and battery cartridge may differ from country to country.• Weight, with battery cartridge, according to EPTA-Procedure 01/2003END004-6SymbolsThe following show the symbols used for the equipment.Be sure that you understand their meaning before use.・ Read instruction manual.・ Only for EU countriesDo not dispose of electric equipment orbattery pack together with householdwaste material!In observance of the EuropeanDirectives, on Waste Electric andElectronic Equipment and Batteries andAccumulators and Waste Batteries andAccumulators and their implementationin accordance with national laws,electric equipment and batteries andbattery pack(s) that have reached theend of their life must be collectedseparately and returned to anenvironmentally compatible recyclingfacility. ENE039-1Intended useThe tool is intended for impact drilling in brick, concreteand stone as well as for drilling without impact in wood,metal, ceramic and plastic.ENG905-1NoiseThe typical A-weighted noise level determinedaccording to EN60745:Sound pressure level (LpA) : 82 dB (A)Sound power level (LWA) : 93 dB (A)Uncertainty (K) : 3 dB (A)Wear ear protectionENG900-1VibrationThe vibration total value (tri-axial vector sum)determined according to EN60745:Model DHP470Work mode: impact drilling into concreteVibration emission (ah,ID) : 8.0 m/s 2Uncertainty (K) : 1.5 m/s 2Work mode: drilling into metalVibration emission (ah,D) : 2.5 m/s 2 or lessUncertainty (K) : 1.5 m/s 2Model DHP480Work mode: impact drilling into concreteVibration emission (ah,ID) : 7.0 m/s 2Uncertainty (K) : 1.5 m/s 2Work mode: drilling into metalVibration emission (ah,D) : 2.5 m/s 2 or lessUncertainty (K) : 1.5 m/s 2CdNi-MHLi-ion