9 ENGLISHX _ _~¯_°μÐ ±°? ²°j ³°( G J # gauge when you turn on the tool. If nothing is connectedto the tool, the pressure gauge displays "0".You can set the air pressure on the pressure gauge. To $ $ /+E(%Y("G&%,/,("G& [_ _ à ~¯_°¶Ð ±° Lamp ²° Main power switchCAUTION: m _ à _ d°I # # I #䈱 #pressing the main power switch, the lamp goes out.NOTICE: " W È ° o Ãd à _ _ °NOTE:? # 䈱 the lamp. Be careful not to scratch the lens of lamp, orit may lower the illumination. _ ~¯_°·Ð ±°" ²° Presta valve adapter³°) $ G ( _ ~¯_°¸Ð ±° Hose holder ²° Hose$ OPERATIONNOTE: The standard adapters vary depending on thecountry. _ _ W W ±° Unfold the air chuck clamp.²° G ' E ³° > E# ~¯_°¹Ð ±°' ²°)E³°)chuck clamp ´° Valve stem´° ) ' ' μ° Turn on the tool.¶° GJ # checking the status of the tire.NOTICE: " _ _ W W È _ _ o d W à W W° " _ È W - _ _È d _ à °Ã Ã È n W È _ ° _ W W ±° Unfold the air chuck clamp.²° ) E ~¯_°±ºÐ ±°)E²° Valve stem ³°)chuck³° > E# ´° Turn on the tool, and then set the pressure valueappropriate for the tire using the pressure gauge.μ° X $ J _ X W W ±° Loosen the locking nut on the valve stem.~¯_°±±Ð ±° Locking nut²° Unfold the air chuck clamp.³° ) ( stem, and then attach the air chuck to the Presta valveadapter.~¯_°±²Ð ±° Presta valve adapter ²°)E³°)chuck clamp ´° Valve stem´° > E# μ° Turn on the tool, and then set the pressure valueappropriate for the tire using the pressure gauge.¶° X $ J ·° Remove the air chuck and Presta valve adapter,and then tighten the locking nut. _ J J- $J - $J J ±° Unfold the air chuck clamp.²° ) the air chuck.~¯_°±³Ð ±°)E²°)E³°" needle ´° Tapered adapter³° > E# ´° G the hole on the item.μ° Turn on the tool, and then set the appropriatepressure value using the pressure gauge.
