5FUNCTIONALDESCRIPTION CAUTION:• Always be sure that the tool is switched off and unplugged beforeadjusting or checking function on the tool.Switch actionCAUTION:• Before plugging in the tool, always check to see that the switch triggeractuates properly and returns to the “OFF” position when released.To start the tool, simply pull the switch trigger. Tool speed is increased byincreasing pressure on the switch trigger. Release the switch trigger to stop.For continuous operation, pull the switch trigger and then push the lock leverupward.To stop the tool from the locked position, pull the switch trigger fully, thenrelease it.Reversing switch actionThis tool has a reversing switch to change the rotational direction. Move thereversing switch lever to the position (A side) for clockwise (forward) rota-tion or the position (B side) for counterclockwise (reverse) rotation.CAUTION:• Always check the rotational direction before operation.• Use the reversing switch only after the tool comes to a complete stop. Itwill damage the tool to change the rotational direction before the toolstops.HookWhen using the hook, pull it out in “A” direction and then push it in “B” directionto secure in place.When not using the hook, return it back to its initial position by following theabove procedures in reverse.1. Switch trigger2. Lock lever120030201. Reversing switch lever1AB0030271. Hook1A003032B003033