Makita DP3003 Instruction Manual

Also see for DP3002: Specifications Instruction manual Parts Breakdown Instruction manual Instruction manual

Contents

Makita DP3003 Instruction Manual Manual pdf 4 page image

4The technical documentation is kept by our authorisedrepresentative in Europe who is:Makita International Europe Ltd.Michigan Drive, Tongwell,Milton Keynes, Bucks MK15 8JD, England30.1.2009000230Tomoyasu KatoDirectorMakita Corporation3-11-8, Sumiyoshi-cho,Anjo, Aichi, 446-8502, JAPANGEA010-1General Power Tool SafetyWarningsWARNING Read all safety warnings and allinstructions. Failure to follow the warnings andinstructions may result in electric shock, fire and/orserious injury.Save all warnings and instructions forfuture reference. GEB001-6DRILL SAFETY WARNINGS1. Use auxiliary handle(s), if supplied with thetool. Loss of control can cause personal injury.2. Hold power tool by insulated grippingsurfaces, when performing an operationwhere the cutting accessory may contacthidden wiring or its own cord. Cuttingaccessory contacting a "live" wire may makeexposed metal parts of the power tool "live" andcould give the operator an electric shock.3. Always be sure you have a firm footing.Be sure no one is below when using the tool inhigh locations.4. Hold the tool firmly.5. Keep hands away from rotating parts.6. Do not leave the tool running. Operate the toolonly when hand-held.7. Do not touch the drill bit or the workpieceimmediately after operation; they may beextremely hot and could burn your skin.8. Some material contains chemicals which maybe toxic. Take caution to prevent dustinhalation and skin contact. Follow materialsupplier safety data.SAVE THESE INSTRUCTIONS.WARNING:DO NOT let comfort or familiarity with product(gained from repeated use) replace strict adherenceto safety rules for the subject product. MISUSE orfailure to follow the safety rules stated in thisinstruction manual may cause serious personalinjury.FUNCTIONAL DESCRIPTIONCAUTION:• Always be sure that the tool is switched off andunplugged before adjusting or checking function onthe tool.Switch actionFig.1CAUTION:• Before plugging in the tool, always check to seethat the switch trigger actuates properly and returnsto the "OFF" position when released.To start the tool, simply pull the switch trigger. Tool speedis increased by increasing pressure on the switch trigger.Release the switch trigger to stop.For continuous operation, pull the switch trigger and thenpush the lock lever upward.To stop the tool from the locked position, pull the switchtrigger fully, then release it.Reversing switch actionFig.2This tool has a reversing switch to change the rotationaldirection. Move the reversing switch lever tothe position (A side) for clockwise (forward) rotation orthe position (B side) for counterclockwise (reverse)rotation.CAUTION:• Always check the rotational direction beforeoperation.• Use the reversing switch only after the tool comes toa complete stop. It will damage the tool to changethe rotational direction before the tool stops.HookFig.3Fig.4When using the hook, pull it out in "A" direction and thenpush it in "B" direction to secure in place.When not using the hook, return it back to its initialposition by following the above procedures in reverse.