Makita DP4700 Instruction Manual

Also see for 6402: Instruction manual Instruction manual Parts Breakdown Instruction manual Instruction manual

3ENGLISH (Original instructions)Explanation of general view1 Low2 High3 Speed control screw4 Switch trigger5 Lock button6 Reversing switch lever7 Side grip8 Tighten9 Chuck key10 Sleeve11 RingSPECIFICATIONSModel 6402 DP4700CapacitiesSteel ....................................................................................................... 10 mm 13 mmWood ...................................................................................................... 21 mm 36 mmNo load speed (min–1) ............................................................................... 0 – 1,200 0 – 550Overall length ............................................................................................ 264 mm 275 mmNet weight .................................................................................................. 1.5 kg 2.2 kgSafety class ................................................................................................ /II /II• Due to our continuing program of research and devel-opment, the specifications herein are subject to changewithout notice.• Specifications may differ from country to country.• Weight according to EPTA-Procedure 01/2003ENE032-1Intended useThe tool is intended for drilling in wood, metal and plastic.ENF002-1Power supplyThe tool should be connected only to a power supply ofthe same voltage as indicated on the nameplate, and canonly be operated on single-phase AC supply. They aredouble-insulated in accordance with European Standardand can, therefore, also be used from sockets withoutearth wire.GEA010-1General Power Tool Safety WarningsWARNING Read all safety warnings and allinstructions. Failure to follow the warnings andinstructions may result in electric shock, fire and/orserious injury.Save all warnings and instructions for future refer-ence.GEB001-6DRILL SAFETY WARNINGS1. Use auxiliary handle(s), if supplied with the tool.Loss of control can cause personal injury.2. Hold power tool by insulated gripping surfaces,when performing an operation where the cuttingaccessory may contact hidden wiring or its owncord. Cutting accessory contacting a “live” wire maymake exposed metal parts of the power tool “live”and could give the operator an electric shock.3. Always be sure you have a firm footing.Be sure no one is below when using the tool inhigh locations.4. Hold the tool firmly.5. Keep hands away from rotating parts.6. Do not leave the tool running. Operate the toolonly when hand-held.7. Do not touch the drill bit or the workpiece imme-diately after operation; they may be extremelyhot and could burn your skin.8. Some material contains chemicals which may betoxic. Take caution to prevent dust inhalationand skin contact. Follow material supplier safetydata.SAVE THESE INSTRUCTIONS.WARNING:DO NOT let comfort or familiarity with product(gained from repeated use) replace strict adherenceto safety rules for the subject product. MISUSE orfailure to follow the safety rules stated in this instruc-tion manual may cause serious personal injury.FUNCTIONAL DESCRIPTIONCAUTION:• Always be sure that the tool is switched off andunplugged before adjusting or checking function on thetool.Switch action (Fig. 1)CAUTION:• Before plugging in the tool, always check to see thatthe switch trigger actuates properly and returns to the“OFF” position when released.To start the tool, simply pull the switch trigger. Tool speedis increased by increasing pressure on the switch trigger.Release the switch trigger to stop.For continuous operation, pull the switch trigger and thenpush in the lock button.To stop the tool from the locked position, pull the switchtrigger fully, then release it.A speed control screw is provided so that maximum toolspeed can be limited (variable).Turn the speed control screw clockwise for higher speed,and counterclockwise for lower speed.Reversing switch actionFor Model DP4700 (Fig. 2)This tool has a reversing switch to change the rotationaldirection. Move the reversing switch lever to the posi-tion for clockwise (forward) rotation or the position forcounterclockwise (reverse) rotation.