9Raise the arm part of the spring and then place it in therecessed part of the housing with a slotted bitscrewdriver of slender shaft or the like.1012020Use pliers to remove the carbon brush cap of the carbonbrushes. Take out the worn carbon brushes, insert thenew ones and replace the carbon brush cap in reverse.21013950Make sure to place the lead wire in opposite side of thearm.12006304Make sure that the carbon brush caps fit into the holes inbrush holders securely.Reinstall the rear cover and tighten two screws securely.To maintain product SAFETY and RELIABILITY, repairs,any other maintenance or adjustment should beperformed by Makita Authorized Service Centers, alwaysusing Makita replacement parts.OPTIONAL ACCESSORIESCAUTION:• These accessories or attachments arerecommended for use with your Makita toolspecified in this manual. The use of any otheraccessories or attachments might present a risk ofinjury to persons. Only use accessory orattachment for its stated purpose.If you need any assistance for more details regardingthese accessories, ask your local Makita Service Center.• Screw bits• Hook• Plastic carrying case• Various type of Makita genuine batteries andchargers• Battery protector• Bit-pieceNOTE:• Some items in the list may be included in the toolpackage as standard accessories. They may differfrom country to country.1. Lead wire2. Carbon brushcap1. Hole2. Carbon brushcap1. Carbon brushcap