Makita DTD134 Instruction Manual

Also see for DTD134: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

Makita DTD134 Instruction Manual Manual pdf 2 page image

2ENGLISH (Original instructions)SPECIFICATIONSModel DTD134 DTD146Machine screw 4 mm - 8 mmStandard bolt 5 mm - 14 mmCapacitiesHigh tensile bolt 5 mm - 12 mmNo load speed (min -1) 0 - 2,400 0 - 2,300Impacts per minute 0 - 3,200Overall length 138 mmNet weight 1.2 kg (with battery BL1415/BL1415N)1.4 kg (with battery BL1430/BL1440)1.3 kg (with battery BL1815/BL1815N/BL1820)1.5 kg (with battery BL1830/BL1840/BL1850)Rated voltage D.C.14.4 V D.C.18 V• Due to our continuing program of research and development, the specifications herein are subject to change without notice.• Specifications and battery cartridge may differ from country to country.• Weight, with battery cartridge, according to EPTA-Procedure 01/2003END004-6SymbolsThe following show the symbols used for the equipment.Be sure that you understand their meaning before use.･ Read instruction manual.･ Only for EU countriesDo not dispose of electric equipment orbattery pack together with householdwaste material!In observance of the EuropeanDirectives, on Waste Electric andElectronic Equipment and Batteries andAccumulators and Waste Batteries andAccumulators and their implementationin accordance with national laws,electric equipment and batteries andbattery pack(s) that have reached theend of their life must be collectedseparately and returned to anenvironmentally compatible recyclingfacility. ENE033-1Intended useThe tool is intended for screw driving in wood, metal andplastic. ENG905-1NoiseThe typical A-weighted noise level determined accordingto EN60745:Model DTD134Sound pressure level (LpA) : 92 dB (A)Sound power level (LWA) : 103 dB (A)Uncertainty (K) : 3 dB (A)Model DTD146Sound pressure level (LpA) : 93 dB (A)Sound power level (LWA) : 104 dB (A)Uncertainty (K) : 3 dB (A)Wear ear protectionENG900-1VibrationThe vibration total value (tri-axial vector sum)determined according to EN60745:Model DTD134Work mode : impact tightening of fasteners of themaximum capacity of the toolVibration emission (ah ) : 12.0 m/s 2Uncertainty (K) : 1.5 m/s 2Model DTD146Work mode : impact tightening of fasteners of themaximum capacity of the toolVibration emission (ah ) : 15.5 m/s 2Uncertainty (K) : 2.0 m/s 2ENG901-1• The declared vibration emission value has beenmeasured in accordance with the standard testmethod and may be used for comparing one toolwith another.• The declared vibration emission value may also beused in a preliminary assessment of exposure.WARNING:• The vibration emission during actual use of the powertool can differ from the declared emission valuedepending on the ways in which the tool is used.CdNi-MHLi-ion