Makita DTD152 Instruction Manual

Also see for DTD152: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

6 ENGLISHReversing switch action1A B► 1. Reversing switch leverCAUTION: Always check the direction ofrotation before operation.CAUTION: Use the reversing switch only afterthe tool comes to a complete stop. Changing thedirection of rotation before the tool stops may dam-age the tool.CAUTION: When not operating the tool,always set the reversing switch lever to the neu-tral position.This tool has a reversing switch to change the directionof rotation. Depress the reversing switch lever from theA side for clockwise rotation or from the B side for coun-terclockwise rotation.When the reversing switch lever is in the neutral posi-tion, the switch trigger cannot be pulled.ASSEMBLYCAUTION: Always be sure that the tool isswitched off and the battery cartridge is removedbefore carrying out any work on the tool.Installing or removing driver bit/socket bit12 mm(15/32”)9 mm(3/8”)Use only the driver bit/socket bit shown in the figure. Donot use any other driver bit/socket bit.21► 1. Driver bit 2. SleeveTo install the driver bit, insert it into the sleeve as far asit will go.21► 1. Driver bit 2. SleeveTo remove the driver bit, pull the sleeve in the directionof the arrow and pull the driver bit out.NOTE: If the driver bit is not inserted deep enoughinto the sleeve, the sleeve will not return to its originalposition and the driver bit will not be secured. In thiscase, try re-inserting the bit according to the instruc-tions above.NOTE: When it is difficult to insert the driver bit, pullthe sleeve and insert it into the sleeve as far as it willgo.NOTE: After inserting the driver bit, make sure that itis firmly secured. If it comes out, do not use it.Installing hook231► 1. Groove 2. Hook 3. Screw

/ 28

Related manuals for Makita DTD152

Makita DTD152 Instruction Manual

This manual is suitable for:

DTD152

manualsdatabase

Your AI-powered manual search engine