Makita DTD152 Instruction Manual

Also see for DTD152: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

4 ENGLISHENGLISH (Original instructions)SPECIFICATIONSModel: DTD152Fastening capacities Machine screw 4 mm - 8 mmStandard bolt 5 mm - 16 mmHigh tensile bolt 5 mm - 12 mmNo load speed 0 - 2,900 min -1Impacts per minute 0 - 3,500 min -1Overall length 137 mmRated voltage D.C. 18 VNet weight 1.3 - 1.6 kg• Due to our continuing program of research and development, the specifications herein are subject to change without notice.• Specifications may differ from country to country.• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-est combination, according to EPTA-Procedure 01/2014, are shown in the table.Applicable battery cartridge and chargerBattery cartridge BL1815N / BL1820 / BL1820B / BL1830 / BL1830B / BL1840 /BL1840B / BL1850 / BL1850B / BL1860BCharger DC18RC / DC18RD / DC18RE / DC18SD / DC18SE / DC18SF• Some of the battery cartridges and chargers listed above may not be available depending on your region of residence.WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridgesand chargers may cause injury and/or fire.Intended useThe tool is intended for screw driving in wood, metal and plastic.NoiseThe typical A-weighted noise level determined accord-ing to EN62841-2-2:Sound pressure level (LpA) : 93 dB(A)Sound power level (LWA) : 104 dB (A)Uncertainty (K) : 3 dB(A)NOTE: The declared noise emission value(s) has beenmeasured in accordance with a standard test methodand may be used for comparing one tool with another.NOTE: The declared noise emission value(s) mayalso be used in a preliminary assessment of exposure.WARNING: Wear ear protection.WARNING: The noise emission during actualuse of the power tool can differ from the declared val-ue(s) depending on the ways in which the tool is usedespecially what kind of workpiece is processed.WARNING: Be sure to identify safety measuresto protect the operator that are based on an estima-tion of exposure in the actual conditions of use (tak-ing account of all parts of the operating cycle suchas the times when the tool is switched off and whenit is running idle in addition to the trigger time).VibrationThe vibration total value (tri-axial vector sum) deter-mined according to EN62841-2-2:Work mode: impact tightening of fasteners of the maxi-mum capacity of the toolVibration emission (ah) : 10.5 m/s2Uncertainty (K) : 1.5 m/s2NOTE: The declared vibration total value(s) has beenmeasured in accordance with a standard test methodand may be used for comparing one tool with another.NOTE: The declared vibration total value(s) may alsobe used in a preliminary assessment of exposure.WARNING: The vibration emission duringactual use of the power tool can differ from thedeclared value(s) depending on the ways in whichthe tool is used especially what kind of workpieceis processed.WARNING: Be sure to identify safety mea-sures to protect the operator that are based on anestimation of exposure in the actual conditions ofuse (taking account of all parts of the operatingcycle such as the times when the tool is switchedoff and when it is running idle in addition to thetrigger time).

/ 52

Related manuals for Makita DTD152

Makita DTD152 Instruction Manual

This manual is suitable for:

DTD152 DTD152RTJ DTD152Z

manualsdatabase

Your AI-powered manual search engine