Makita DTD172Z Instruction Manual

Also see for DTD172: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

6 ENGLISHWARNING: Wear ear protection.WARNING: The noise emission during actualuse of the power tool can differ from the declaredvalue(s) depending on the ways in which the tool isused especially what kind of workpiece is processed.WARNING: Be sure to identify safety measuresto protect the operator that are based on an estima-tion of exposure in the actual conditions of use (tak-ing account of all parts of the operating cycle suchas the times when the tool is switched off and whenit is running idle in addition to the trigger time).VibrationThe vibration total value (tri-axial vector sum) deter-mined according to EN62841-2-2:Work mode: impact tightening of fasteners of the maxi-mum capacity of the toolVibration emission (a h ) : 13.5 m/s 2Uncertainty (K) : 1.5 m/s2NOTE: The declared vibration total value(s) has beenmeasured in accordance with a standard test methodand may be used for comparing one tool with another.NOTE: The declared vibration total value(s) may alsobe used in a preliminary assessment of exposure.WARNING: The vibration emission during actualuse of the power tool can differ from the declared val-ue(s) depending on the ways in which the tool is usedespecially what kind of workpiece is processed.WARNING: Be sure to identify safety mea-sures to protect the operator that are based on anestimation of exposure in the actual conditions ofuse (taking account of all parts of the operatingcycle such as the times when the tool is switchedoff and when it is running idle in addition to thetrigger time).EC Declaration of ConformityFor European countries onlyThe EC declaration of conformity is included as Annex Ato this instruction manual.SAFETY WARNINGSGeneral power tool safety warningsWARNING: Read all safety warnings, instruc-tions, illustrations and specifications providedwith this power tool. Failure to follow all instructionslisted below may result in electric shock, fire and/orserious injury.Save all warnings and instruc-tions for future reference.The term "power tool" in the warnings refers to yourmains-operated (corded) power tool or battery-operated(cordless) power tool.Cordless impact driver safety warnings1. Hold the power tool by insulated grippingsurfaces, when performing an operationwhere the fastener may contact hidden wiring.Fasteners contacting a "live" wire may makeexposed metal parts of the power tool "live" andcould give the operator an electric shock.2. Always be sure you have a firm footing.Be sure no one is below when using the tool inhigh locations.3. Hold the tool firmly.4. Wear ear protectors.5. Do not touch the bit or the workpiece immedi-ately after operation. They may be extremelyhot and could burn your skin.6. Keep hands away from rotating parts.7. Use auxiliary handle(s), if supplied with thetool. Loss of control can cause personal injury.8. Hold the power tool by insulated gripping sur-faces, when performing an operation where thecutting accessory may contact hidden wiring.Cutting accessory contacting a "live" wire maymake exposed metal parts of the power tool "live"and could give the operator an electric shock.9. Make sure there are no electrical cables, waterpipes, gas pipes etc. that could cause a hazardif damaged by use of the tool.SAVE THESE INSTRUCTIONS.WARNING: DO NOT let comfort or familiaritywith product (gained from repeated use) replacestrict adherence to safety rules for the subjectproduct.MISUSE or failure to follow the safety rules statedin this instruction manual may cause seriouspersonal injury.Important safety instructions forbattery cartridge1. Before using battery cartridge, read all instruc-tions and cautionary markings on (1) battery char-ger, (2) battery, and (3) product using battery.2. Do not disassemble or tamper with the batterycartridge. It may result in a fire, excessive heat,or explosion.3. If operating time has become excessivelyshorter, stop operating immediately. It mayresult in a risk of overheating, possible burnsand even an explosion.4. If electrolyte gets into your eyes, rinse themout with clear water and seek medical atten-tion right away. It may result in loss of youreyesight.5. Do not short the battery cartridge:(1) Do not touch the terminals with any con-ductive material.(2) Avoid storing battery cartridge in a con-tainer with other metal objects such asnails, coins, etc.(3) Do not expose battery cartridge to wateror rain.