9OPTIONAL ACCESSORIESCAUTION:• These accessories or attachments are recommendedfor use with your Makita tool specified in this manual.The use of any other accessories or attachments mightpresent a risk of injury to persons. Only use accessoryor attachment for its stated purpose.If you need any assistance for more details regardingthese accessories, ask your local Makita Service Center.• Segment saw blade• Round saw blade• Plunge cut saw blade• Scraper (rigid)• Scraper (flexible)• Serrated seg blade• General joint cutter• HM remover• HM seg saw blade• HM sanding plate• Diamond seg sawblade• Sanding pad• Adapter• Abrasive paper delta (red / white / black)• Fleece delta (medium / coarse / without grit)• Polishing felt delta• Hex wrench• Dust extraction attachment• Makita genuine battery and chargerNOTE:• Some items in the list may be included in the tool pack-age as standard accessories. They may differ fromcountry to country.ENG905-1NoiseThe typical A-weighted noise level determined accordingto EN60745:Work mode: SandingSound pressure level (L pA): 78 dB (A)Uncertainty (K): 3 dB (A)The noise level under working may exceed 80 dB (A).Work mode: Cutting with plunge cut saw bladeModel DTM40Sound pressure level (L pA): 82 dB (A)Sound power level (LWA): 93 dB (A)Uncertainty (K): 3 dB (A)Model DTM50Sound pressure level (L pA): 84 dB (A)Sound power level (LWA): 95 dB (A)Uncertainty (K): 3 dB (A)Work mode: Cutting with segmential saw bladeSound pressure level (L pA): 81 dB (A)Sound power level (LWA): 92 dB (A)Uncertainty (K): 3 dB (A)Work mode: ScrapingModel DTM40Sound pressure level (L pA): 81 dB (A)Sound power level (LWA): 92 dB (A)Uncertainty (K): 3 dB (A)Model DTM50Sound pressure level (L pA): 83 dB (A)Sound power level (LWA): 94 dB (A)Uncertainty (K): 3 dB (A)Wear ear protectionENG900-1VibrationThe vibration total value (tri-axial vector sum) determinedaccording to EN60745:Work mode: SandingVibration emission (a h ): 2.5 m/s 2 or lessUncertainty (K): 1.5 m/s 2Work mode: Cutting with plunge cut saw bladeModel DTM40Vibration emission (a h ): 9.5 m/s 2Uncertainty (K): 1.5 m/s 2Model DTM50Vibration emission (a h ): 10.0 m/s 2Uncertainty (K): 1.5 m/s 2Work mode: Cutting with segmential saw bladeModel DTM40Vibration emission (a h ): 5.0 m/s 2Uncertainty (K): 1.5 m/s 2Model DTM50Vibration emission (a h ): 5.5 m/s 2Uncertainty (K): 1.5 m/s 2Work mode: ScrapingModel DTM40Vibration emission (a h ): 7.5 m/s 2Uncertainty (K): 1.5 m/s 2Model DTM50Vibration emission (a h ): 9.5 m/s 2Uncertainty (K): 1.5 m/s 2ENG901-1• The declared vibration emission value has been mea-sured in accordance with the standard test method andmay be used for comparing one tool with another.• The declared vibration emission value may also beused in a preliminary assessment of exposure.WARNING:• The vibration emission during actual use of the powertool can differ from the declared emission valuedepending on the ways in which the tool is used.• Be sure to identify safety measures to protect the oper-ator that are based on an estimation of exposure in theactual conditions of use (taking account of all parts ofthe operating cycle such as the times when the tool isswitched off and when it is running idle in addition tothe trigger time).