Makita DTW152 Instruction Manual

7Fig.11Raise the arm part of the spring and then place it in therecessed part of the housing with a slotted bitscrewdriver of slender shaft or the like.Fig.12Use pliers to remove the carbon brush caps of the carbonbrushes. Take out the worn carbon brushes, insert thenew ones and replace the carbon brush caps in reverse.Fig.13Fig.14Make sure that the carbon brush cap have fit into theholes in brush holders securely.Reinstall the rear cover and tighten two screws securely.To maintain product SAFETY and RELIABILITY, repairs,any other maintenance or adjustment should beperformed by Makita Authorized Service Centers, alwaysusing Makita replacement parts.OPTIONAL ACCESSORIESCAUTION:• These accessories or attachments arerecommended for use with your Makita toolspecified in this manual. The use of any otheraccessories or attachments might present a risk ofinjury to persons. Only use accessory orattachment for its stated purpose.If you need any assistance for more details regardingthese accessories, ask your local Makita Service Center.• Sockets• Extension bar• Universal joint• Bit adapter• Various type of Makita genuine batteries andchargersNOTE:• Some items in the list may be included in the toolpackage as standard accessories. They may differfrom country to country.