Makita DTW181 Instruction Manual

Also see for DTW181: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

9 ENGLISHon the switch trigger.Release the switch trigger to stop.NOTE: The tool automaticallystops if you keeppulling the switch trigger for about 6minutes.Lighting up the front lampCAUTION: Do not look in the light or see thesource of light directly.► Fig.4: 1. Lamp► Fig.5: 1. ButtonPull the switch trigger to turn on the lamp. To turn off,release it. The lamp goesout approximately 10 secondsafter releasing the switch trigger.To keep the lamp off, turn off the lamp status. First pulland release the switch trigger. And then press thebutton for one second within 10 seconds. To turn onthe lamp status again, press the button again similarly.► Fig.7: 1. Hard 2. Soft 3. Reverse rotationauto stop mode 4. Changed in three steps 5.ButtonReversing switch actionNOTE: To confirm the lampstatus, pull the trigger.When the lamp lightsup by pulling theswitch trigger, the lamp status isON. When the lamp does not come on, the lampstatus is OFF.NOTE: When the tool isoverheated, the lightflashes for one minute,and then the LEDdisplay goes off. Inthis case, cool down the tool beforeoperating again.NOTE: Use a dry clothto wipe the dirtoff the lens ofthe lamp. Be careful not to scratch the lensof lamp, or it may lower theillumination.CAUTION: Always check the direction ofrotation before operation.CAUTION: Use the reversing switch only afterthe tool comes to a complete stop. Changing thedirection of rotation before thetool stops may damagethe tool.CAUTION: When not operating the tool,always set the reversing switch lever to theneutral position.► Fig.6: 1. Reversing switch leverThis tool has a reversing switch to change the directionof rotation. Depress the reversing switch lever from theA side for clockwise rotation or from the B side forcounterclockwise rotation.When the reversing switch lever is in the neutralposition, the switch trigger cannot be pulled.Changing the impact forceAll manuals and user guides at all-guides.com