Makita DTW190RMJ Instruction Manual

Also see for DTW190: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

6 ENGLISHIndicator lamps RemainingcapacityLighted Off Blinking75% to 100%50% to 75%25% to 50%0% to 25%Charge thebattery.The batterymay havemalfunctioned.NOTE: Depending on the conditions of use and theambient temperature, the indication may differ slightlyfrom the actual capacity.Switch action1► 1. Switch triggerCAUTION: Before installing the battery car-tridge into the tool, always check to see that theswitch trigger actuates properly and returns tothe "OFF" position when released.To start the tool, simply pull the switch trigger. Toolspeed is increased by increasing pressure on the switchtrigger. Release the switch trigger to stop.Lighting up the front lamp1► 1. LampCAUTION: Do not look in the light or see thesource of light directly.Pull the switch trigger to light up the lamp. The lamp keeps onlighting while the switch trigger is being pulled. The lamp goesout just after the switch trigger is released.NOTE: Use a dry cloth to wipe the dirt off the lens ofthe lamp. Be careful not to scratch the lens of lamp, orit may lower the illumination.Reversing switch action1 1A B► 1. Reversing switch leverCAUTION: Always check the direction ofrotation before operation.CAUTION: Use the reversing switch only after thetool comes to a complete stop. Changing the direction ofrotation before the tool stops may damage the tool.CAUTION: When not operating the tool, alwaysset the reversing switch lever to the neutral position.This tool has a reversing switch to change the directionof rotation. Depress the reversing switch lever from theA side for clockwise rotation or from the B side for coun-terclockwise rotation.When the reversing switch lever is in the neutral posi-tion, the switch trigger cannot be pulled.