Makita DTW190Z Instruction Manual

Also see for DTW190: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

4 ENGLISHENGLISH (Original instructions)SPECIFICATIONSModel: DTW190Fastening capacities Standard bolt M8 - M16High tensile bolt M8 - M12Square drive 12.7 mmNo load speed 0 - 2,300 min -1Impacts per minute 0 - 3,000 min -1Overall length 176 mmRated voltage D.C. 18 VStandard battery cartridge BL1815, BL1815N, BL1820,BL1820BBL1830, BL1830B, BL1840,BL1840B, BL1850, BL1850B,BL1860BNet weight 1.4 kg 1.7 kg• Due to our continuing program of research and development, the specifications herein are subject to changewithout notice.• Specifications and battery cartridge may differ from country to country.• Weight, with battery cartridge, according to EPTA-Procedure 01/2003Intended useThe tool is intended for fastening bolts and nuts.NoiseThe typical A-weighted noise level determined accord-ing to EN60745:Sound pressure level (LpA ) : 94 dB(A)Sound power level (LWA ) : 105 dB (A)Uncertainty (K) : 3 dB(A)WARNING: Wear ear protection.VibrationThe vibration total value (tri-axial vector sum) deter-mined according to EN60745:Work mode: impact tightening of fasteners of the maxi-mum capacity of the toolVibration emission (ah) : 8.5 m/s2Uncertainty (K) : 1.5 m/s2NOTE: The declared vibration emission value hasbeen measured in accordance with the standard testmethod and may be used for comparing one tool withanother.NOTE: The declared vibration emission valuemay also be used in a preliminary assessment ofexposure.WARNING: The vibration emission during actualuse of the power tool can differ from the declaredemission value depending on the ways in which thetool is used.WARNING: Be sure to identify safety measuresto protect the operator that are based on an estima-tion of exposure in the actual conditions of use (takingaccount of all parts of the operating cycle such asthe times when the tool is switched off and when it isrunning idle in addition to the trigger time).EC Declaration of ConformityFor European countries onlyMakita declares that the following Machine(s):Designation of Machine: Cordless Impact WrenchModel No./ Type: DTW190Conforms to the following European Directives:2006/42/ECThey are manufactured in accordance with the followingstandard or standardized documents: EN60745The technical file in accordance with 2006/42/EC isavailable from:Makita, Jan-Baptist Vinkstraat 2, 3070, Belgium7.16.2015Yasushi FukayaDirectorMakita, Jan-Baptist Vinkstraat 2, 3070, BelgiumGeneral power tool safety warningsWARNING: Read all safety warnings andall instructions. Failure to follow the warnings andinstructions may result in electric shock, fire and/orserious injury.