Makita DTW250 Instruction Manual

Also see for DTW250: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

Makita DTW250 Instruction Manual Manual pdf 2 page image

2ENGLISH (Original instructions)SPECIFICATIONSModel DTW250 DTW251Standard bolt M10 - M16 M10 - M16Capacities High tensile bolt M10 - M14 M10 - M14Square drive 12.7 mm 12.7 mmNo load speed (min -1) 0 - 2,200 0 - 2,100Impacts per minute 0 - 3,200 0 - 3,200Max. fastening torque 230 N.m 230 N.mOverall length 165 mm 165 mmNet weight 1.6 kg 1.5 kgRated voltage D.C.14.4 V D.C.18 V• Due to our continuing program of research and development, the specifications herein are subject to change without notice.• Specifications and battery cartridge may differ from country to country.• Weight, with battery cartridge, according to EPTA-Procedure 01/2003END004-4SymbolsThe following show the symbols used for the equipment.Be sure that you understand their meaning before use.･ Read instruction manual.･ Only for EU countriesDo not dispose of electric equipment orbattery pack together with householdwaste material!In observance of European Directive2002/96/EC on waste electric andelectronic equipment, 2006/66/EC onbatteries and accumulators and wastebatteries and accumulators and theirimplementation in accordance withnational laws, electric equipment andbattery pack that have reached the endof their life must be collected separatelyand returned to an environmentallycompatible recycling facility. ENE036-1Intended useThe tool is intended for fastening bolts and nuts. ENG905-1NoiseThe typical A-weighted noise level determined accordingto EN60745:Model DTW250Sound pressure level (LpA) : 90 dB (A)Sound power level (LWA) : 101 dB (A)Uncertainty (K) : 3 dB (A)Model DTW251Sound pressure level (LpA) : 94 dB (A)Sound power level (LWA) : 105 dB (A)Uncertainty (K) : 3 dB (A)Wear ear protectionENG900-1VibrationThe vibration total value (tri-axial vector sum) determinedaccording to EN60745:Model DTW250Work mode : impact tightening of fasteners of themaximum capacity of the toolVibration emission (ah ) : 14.5 m/s 2Uncertainty (K) : 1.5 m/s 2Model DTW251Work mode : impact tightening of fasteners of themaximum capacity of the toolVibration emission (ah ) : 11.0 m/s 2Uncertainty (K) : 1.5 m/s 2ENG901-1• The declared vibration emission value has beenmeasured in accordance with the standard testmethod and may be used for comparing one toolwith another.• The declared vibration emission value may also beused in a preliminary assessment of exposure.WARNING:• The vibration emission during actual use of the powertool can differ from the declared emission valuedepending on the ways in which the tool is used.CdNi-MHLi-ion