Makita DTW280 Instruction Manual

Also see for DTW280: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

Makita DTW280 Instruction Manual Manual pdf 2 page image

2ENGLISH (Original instructions)SPECIFICATIONSModel DTW280 DTW281Standard bolt M10 - M20 M10 - M20Capacities High tensile bolt M10 - M16 M10 - M16Square drive 12.7 mm 12.7 mmImpact mode (Hard) 0 - 2,800 0 - 2,800Impact mode (Medium) 0 - 2,100 0 - 2,100No load speed (min -1)Impact mode (Soft) 0 - 1,600 0 - 1,600Impact mode (Hard) 0 - 3,500 0 - 3,500Impact mode (Medium) 0 - 2,600 0 - 2,600Impacts per minute (min -1)Impact mode (Soft) 0 - 1,800 0 - 1,800Overall length 147 mm 147 mmNet weight 1.5 kg 1.7 kgRated voltage D.C. 14.4 V D.C. 18 V• Due to our continuing program of research and development, the specifications herein are subject to change without notice.• Specifications and battery cartridge may differ from country to country.• Weight, with battery cartridge, according to EPTA-Procedure 01/2003END004-6SymbolsThe following show the symbols used for the equipment.Be sure that you understand their meaning before use.･ Read instruction manual.･ Only for EU countriesDo not dispose of electric equipment orbattery pack together with householdwaste material!In observance of the EuropeanDirectives, on Waste Electric andElectronic Equipment and Batteries andAccumulators and Waste Batteries andAccumulators and their implementationin accordance with national laws,electric equipment and batteries andbattery pack(s) that have reached theend of their life must be collectedseparately and returned to anenvironmentally compatible recyclingfacility. ENE036-1Intended useThe tool is intended for fastening bolts and nuts. ENG905-1NoiseThe typical A-weighted noise level determinedaccording to EN60745:Sound pressure level (LpA) : 96 dB (A)Sound power level (LWA) : 107 dB (A)Uncertainty (K) : 3 dB (A)Wear ear protectionENG900-1VibrationThe vibration total value (tri-axial vector sum)determined according to EN60745:Model DTW280Work mode : impact tightening of fasteners of themaximum capacity of the toolVibration emission (ah ) : 14.0 m/s 2Uncertainty (K) : 1.5 m/s 2Model DTW281Work mode : impact tightening of fasteners of themaximum capacity of the toolVibration emission (ah ) : 11.5 m/s 2Uncertainty (K) : 1.5 m/s 2ENG901-1• The declared vibration emission value has beenmeasured in accordance with the standard testmethod and may be used for comparing one toolwith another.• The declared vibration emission value may also beused in a preliminary assessment of exposure.WARNING:• The vibration emission during actual use of the powertool can differ from the declared emission valuedepending on the ways in which the tool is used.• Be sure to identify safety measures to protect theoperator that are based on an estimation ofCdNi-MHLi-ion