Makita DTWA100 Instruction Manual

Also see for DTWA070: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

8 ENGLISHNOTE: When the reversing switch lever is depressedin the clockwise rotation, the indicator shows thesetting of clockwise rotation.When the reversing switch lever is depressed in thecounterclockwise rotation, the indicator shows thesetting of counterclockwise rotation.NOTE: Use preset number as a guideline. To keepthe fastening torque, number of impacts changesautomatically according to remaining battery capacity.NOTE: For the application software, please contactMakita sales representative.Changing the parameter setting on the tool (Field Setting mode)NOTICE: This function is available by default. If you have disabled the Field Setting mode on the computer,enable this function beforehand. Refer to the instruction manual of "Makita Industry Tool Settings" for how toconfigure.NOTICE: If the Field Setting mode is disabled, making settings on the tool is not available. When you press thesetting button, the values set on the tool are displayed in order.The current setting number is displayed on the indicator.Every time you press the setting button, the indicator shows torque level, rundown level, workable time range, and“Ad”.21► 1. Setting button 2. IndicatorYou can change the following parameter settings on your tool:• Auto-stop setting / Free modeSetting item Display on the indicator DescriptionTorque level 01 - 40FFOPThe torque level at which the TighteningAuto Stop mode worksRundown level L1 - L7OPThe sensitivity of the fastener seatingWorkable time range Lo: 0.1 - 9.9HI: 0.1 - 9.9-.-The shortest/longest duration of the rota-tion when you continue to pull the switchtrigger.NOTICE: If "OP" (Loosening Auto Stop mode) is displayed on the indicator, torque level setting and rundownlevel setting is not available. In this case, change the mode to Tightening Auto Stop mode, and then set the torquelevel and rundown level on the computer using "Makita Industry Tool Settings".