Makita DUB362 Instruction Manual

Also see for DUB362: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

Makita DUB362 Instruction Manual Manual pdf 7 page image

7To start the tool, simply pull the switch trigger. Toolspeed is increased by increasing pressure on the switchtrigger. Release the switch trigger to stop.11015479For continuous operation, pull the switch trigger, push inthe lock button and then release the switch trigger.To stop the tool from the locked position, pull the switchtrigger fully, then release it.Speed change1015477The maximum air volume can be adjusted just byturning the adjusting dial. This can be done even whilethe tool is running. The dial is marked 1 (lowest) to 6(highest).NOTICE:The speed adjusting dial can be turned only as faras 6 and back to 1. Do not force it past 6 or 1, orthe speed adjusting function may no longer work.When working in a high temperature circumstance,the tool may be stopped because of the overheatprotection system. In that case let the tool cooldown. Avoid setting to speed 6 (highest) in hightemperature circumstances.ASSEMBLYCAUTION:• Always be sure that the tool is switched off and thebattery cartridge is removed before carrying outany work on the tool.Installing the long nozzle12 2015480To install the long nozzle:1. Align the small projection of the housing with thegroove of the long nozzle.2. Slide in the long nozzle, and turn it clockwise untilthe triangle markings on the long nozzle and thehousing meet each other.015481The length of the nozzle can be adjusted by changingthe locking position.Installing the shoulder strap(optional accessory)015482Hook the shoulder strap onto the hanger of the tool.Before use, adjust the length of strap so that it is easy towork with it.1. Long nozzle2. Triangle marking1. Adjusting dial1. Lock button

/ 12

Related manuals for Makita DUB362

Makita DUB362 Instruction Manual

This manual is suitable for:

DUB362

manualsdatabase

Your AI-powered manual search engine