Makita DUC256 Instruction Manual

Also see for DUC256: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

8 ENGLISHSaw chain type 91PXNumber of drive links 40 46 52 56Guide bar Guide bar length 250 mm 300 mm 350 mm 400 mmCutting length 238 mm 294 mm 350 mm 387 mmPitch 3/8″Gauge 1.3 mmType Sprocket nose barSprocket Number of teeth 6Pitch 3/8″Saw chain type 25APNumber of drive links 60Guide bar Guide bar length 250 mmCutting length 253 mmPitch 1/4″Gauge 1.3 mmType Carving barSprocket Number of teeth 9Pitch 1/4″WARNING: Use appropriate combination of the guide bar and saw chain. Otherwise personal injury mayresult.SymbolsThe followings show the symbols which may be usedfor the equipment. Be sure that you understand theirmeaning before use.Read instruction manual.Wear safety glasses.Wear ear protection.Wear a helmet, goggles and ear protection.Use appropriate protection for foot-leg andhand-arm.This saw is to be used by properly trainedoperators only.Do not expose to moisture.Maximum permissible cut lengthAlways use two hands when operating thechain saw.Beware of chain saw kickback and avoidcontact with bar tip.Direction of chain travelSaw chain oil adjustmentNi-MHLi-ionOnly for EU countriesDue to the presence of hazardous com-ponents in the equipment, waste electricaland electronic equipment, accumulatorsand batteries may have a negative impacton the environment and human health.Do not dispose of electrical and electronicappliances or batteries with householdwaste!In accordance with the European Directiveon waste electrical and electronic equip-ment and on accumulators and batteriesand waste accumulators and batteries,as well as their adaptation to national law,waste electrical equipment, batteries andaccumulators should be stored separatelyand delivered to a separate collection pointfor municipal waste, operating in accor-dance with the regulations on environmen-tal protection.This is indicated by the symbol of thecrossed-out wheeled bin placed on theequipment.Guaranteed sound power level accordingto EU Outdoor Noise Directive.Sound power level according to AustraliaNSW Noise Control Regulation.Intended useThe tool is intended for cutting branches and pruningtrees. It is also suitable for tree service.