Makita DUC256 Instruction Manual

Also see for DUC256: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

9 ENGLISHSymbolsThe followings show the symbols which may be usedfor the equipment. Be sure that you understand theirmeaning before use.Read instruction manual.Wear safety glasses.Wear ear protection.Wear a helmet, goggles and ear protection.Use appropriate protection for foot-leg andhand-arm.This saw is to be used by properly trainedoperators only.Do not expose to moisture.Maximum permissible cut lengthAlways use two hands when operating thechain saw.Beware of chain saw kickback and avoidcontact with bar tip.Direction of chain travelSaw chain oil adjustmentNi-MHLi-ionOnly for EU countriesDue to the presence of hazardous com-ponents in the equipment, waste electricaland electronic equipment, accumulatorsand batteries may have a negative impacton the environment and human health.Do not dispose of electrical and electronicappliances or batteries with household waste!In accordance with the European Directiveon waste electrical and electronic equip-ment and on accumulators and batteriesand waste accumulators and batteries,as well as their adaptation to national law,waste electrical equipment, batteries andaccumulators should be stored separatelyand delivered to a separate collection pointfor municipal waste, operating in accor-dance with the regulations on environmen-tal protection.This is indicated by the symbol of thecrossed-out wheeled bin placed on theequipment.Guaranteed sound power level accordingto EU Outdoor Noise Directive.Sound power level according to AustraliaNSW Noise Control Regulation.Intended useThe tool is intended for cutting branches and pruningtrees. It is also suitable for tree service.NoiseThe typical A-weighted noise level determined accord-ing to EN62841-1 and EN ISO 11681-2 as applicable:Model DUC256Sound pressure level (LpA ) : 95 dB (A)Sound power level (LWA ) : 103 dB (A)Uncertainty (K) : 3 dB (A)Model DUC306Sound pressure level (LpA ) : 95 dB(A)Sound power level (LWA ) : 103 dB (A)Uncertainty (K) : 3 dB(A)Model DUC356Sound pressure level (LpA ) : 95 dB(A)Sound power level (LWA ) : 103 dB (A)Uncertainty (K) : 3 dB(A)Model DUC406Sound pressure level (LpA ) : 95 dB(A)Sound power level (LWA ) : 103 dB (A)Uncertainty (K) : 3 dB(A)Model DUC256CSound pressure level (LpA ) : 95 dB(A)Sound power level (LWA ) : 103 dB (A)Uncertainty (K) : 3 dB(A)NOTE: The declared noise emission value(s) has beenmeasured in accordance with a standard test methodand may be used for comparing one tool with another.NOTE: The declared noise emission value(s)may also be used in a preliminary assessment ofexposure.WARNING: Wear ear protection.WARNING: The noise emission during actualuse of the power tool can differ from the declaredvalue(s) depending on the ways in which thetool is used especially what kind of workpiece isprocessed.WARNING: Be sure to identify safety mea-sures to protect the operator that are based on anestimation of exposure in the actual conditions ofuse (taking account of all parts of the operatingcycle such as the times when the tool is switchedoff and when it is running idle in addition to thetrigger time).VibrationThe vibration total value (tri-axial vector sum) deter-mined according to EN62841-1 and EN ISO 11681-2 asapplicable:Model DUC256Work mode: cutting woodVibration emission (a h,W ) : 3.6 m/s 2Uncertainty (K) : 1.5 m/s2Model DUC306Work mode: cutting woodVibration emission (a h,W ) : 3.6 m/s 2Uncertainty (K) : 1.5 m/s2