Makita EB5300TH Instruction Manual

Also see for EB5300TH: Instruction manual Repair manual Original instruction manual Original instruction manual

Contents

Makita EB5300TH Instruction Manual Manual pdf 9 page image

9 ENGLISHASSEMBLYCAUTION: Before performing any work onthe blower, always stop the engine and pull thespark plug cap off the spark plug.CAUTION: Start the blower only after havingassembled it completely.CAUTION: Always wear protective gloves.Assembling blower pipes1. Insert the swivel pipe into the flexible pipe andtighten them with the hose band.231► 1. Swivel pipe 2. Flexible pipe 3. Hose band2. Loosen and remove the clamp screw.1► 1. Clamp screwFor tube throttle model, be careful not to twist the cableon the control handle when attaching to the swivel pipe.3. Install the control handle / handle assembly ontothe swivel pipe and tighten them with the clamp screw.21► 1. Control handle / handle assembly 2. Clamp screw4. Attach the flexible pipe to the elbowFor tube throttle model: Insert the elbow to the flexiblepipe. Attach the cable holder between the hose bandand the flexible pipe. Tighten the cable holder, flexiblepipe and elbow with the hose band. Set the controlcable onto the cable holder, and close the cable holder.1 32► 1. Elbow 2. Cable holder 3. Hose band21► 1. Cable holder 2. Control cableFor hip throttle model: Insert the elbow to the flexiblepipe. Tighten the flexible pipe and the elbow with thehose band.5. Attach the long/short pipe to the swivel pipe. Turnthe long/short pipe clockwise to lock it into place. Thenattach the blower nozzle with the long/short pipe. Turnthe blower nozzle clockwise to lock it into place.