11CAUTION: Before doing any work on the brushcutter, always switch off the motor andpull the spark plug connector off thespark plug.Always wear protective gloves!CAUTION: Start the brush cutter only after havingassembled it completely.– After checking the parts, fasten the drive shaft to theengine with four bolts M6 x 30 (1).– Mount the stand by two screws M5 x 12 (2).ASSEMBLY OF ENGINE AND SHAFT(1)(2)

Symbols

Safety instructions

Technical data

Designation of parts

Assembly of engine and shaft

Mounting of handle

Mounting of control cable

Mounting of protector

Mounting of cutter blade

Before start of operation

Correct handling of machine

Resharpening the cutting tool

Servicing instructions

checking the spark plug

Storage

troubleshooting

Makita EBH340U Instruction Manual

EBH340U

first aid

Inspect

Mounting of cutter blade or nylon cutting head