Makita EBH341U Original Instruction Manual

Also see for EBH341L: Original instruction manual Original instruction manual Original instruction manual Original instruction manual Instruction manual

Contents

Makita EBH341U Original Instruction Manual Manual pdf 11 page image

11– In cases where the nylon cord cutter is to be used, be sure to mount thenylon cord cutter protector (4) onto the metal blade protector (3).– Mount the nylon cord cutter protector (4) by sliding it into place from the flankof the metal blade protector (3) as shown.– Remove tape adhered to cutter, which cuts nylon cord, on nylon cord cutterprotector (4).CAUTION: Be sure to push in nylon cord cutter protector (4) until it is fullyinserted.Take care not to injure yourself on the cutter for cutting the nyloncord.(3)(4)– To remove the nylon cord cutter protector (4), apply a hex wrench into thenotch on the metal blade protector (3), push it in and meanwhile slide thenylon cord cutter protector (4).Hex wrenchTurn the machine upside down, and you can replace the metal blade or nyloncutting head easily.– Insert the hex wrench through the hole in the gear case and rotate thereceiver washer (4) until it is locked with the hex wrench.– Loosen the nut (1) (left-hand thread) with the socket wrench and remove thenut (1), cup (2), and clamp washer (3).MOUNTING OF METAL BLADE OR NYLON CUTTING HEAD(3)(3)(2)(2)(1)(1)Hex wrench(4)(4)