Makita EE2650H Original Instruction Manual

Also see for EE2650H: Owner's and safety manual Instruction manual Instruction manual

Makita EE2650H Original Instruction Manual Manual pdf 3 page image

315m(50 FT)360SAFETY INSTRUCTIONSGeneral InstructionsRead this instruction manual to become familiar with handling of the–equipment. Users insufficiently informed will risk danger to themselves aswell as others due to improper handling.It is recommended only to lend the equipment to people who have proven to–be experienced.Always hand over the instruction manual.First users should ask the dealer for basic instructions to familiarize oneself–with the handling of the edger.Children and young persons aged under 18 years must not be allowed to–operate this equipment. Persons over the age of 16 years may howeveruse the device for the purpose of being trained while under supervision of aqualified trainer.Use with the utmost care and attention.–Operate only if you are in good physical condition. Perform all work calmly–and carefully. The user has to accept liability for others.Never use this equipment after consumption of alcohol or drugs, or if feeling–tired or ill.Keep in mind that the operator or user is responsible for accidents or hazards–occurring to other people or their property.National regulation can restrict the use of the machine.–Intended use of the machineThis equipment is only intended for edging the lawn.–Personal protective equipmentThe clothing worn should be functional and appropriate, i.e. it should be tight-–fitting but not cause hindrance. Do not wear either jewelry or clothing whichcould become entangled with bushes or shrubs.In order to avoid either head-, eye-, hand-or foot injuries as well as to protect–your hearing the following protective equipment and protective clothing mustbe used during operation.Always wear a helmet where there is a risk of falling objects. The protective–helmet (1) is to be checked at regular intervals for damage and is to bereplaced at the latest after 5 years. Use only approved protective helmets.The visor (2) of the helmet (or alternatively goggles) protects the face from–flying debris and stones. During operation always wear goggles, or a visor toprevent eye injuries.Wear adequate noise protection equipment to avoid hearing impairment (ear–muffs (3), ear plugs etc.).The work overalls (4) protect against flying stones and debris.–We strongly recommend that the user wears work overalls.Gloves (5) are part of the prescribed equipment and must always be worn–during operation.When using the equipment, always wear sturdy shoes (6) with a non-slip–sole. This protects against injuries and ensures a good footing.Starting up the equipmentPlease make sure that there are no children or other people within a working–range of 15 meters (50 ft), also pay attention to any animals in the workingvicinity.Before use always check the equipment is safe for operation:–Check the security of the cutting tool, the throttle lever for easy action andcheck for proper functioning of the throttle lever lock.Rotation of the cutting tool during idling speed is not allowed. Check with your–dealer for adjustment if in doubt. Check for clean and dry handles and testthe function of the start/stop switch. 15 Meters