Makita EM404MP Original Instruction Manual

Also see for EM403MP: Original instruction manual

Contents

12 ENGLISHEC Declaration of ConformityFor European countries onlyWe as the manufacturers: Makita Europe N.V.,Business address: Jan-Baptist Vinkstraat 2 3070Kortenberg BELGIUM. Authorize Yasushi Fukaya forthe compilation of the technical file and declare underour sole responsibility that the product(s); Designation:Brushcutter & String Trimmer Attachment / StringTrimmer Attachment. Designation of Type(s):EM404MP / EM406MP.Fulfills all the relevant provisions of 2006/42/EC andalso fulfills all the relevant provisions of the followingEC/EU Directives: 2000/14/EC and are manufactured inaccordance with the following Harmonised Standards:EN ISO 11806-1:2011, EN 50636-2-91:2014.Place and date of declaration: Kortenberg, Belgium.30.6.2017Responsible person: Yasushi Fukaya, Director -Makita Europe N.V.SAFETY WARNINGSBrushcutter safety warningsWARNING: Read all safety warnings,instructions, illustrations and specifications pro -vided with this machine. Failure to follow all instruc-tions listed below may result in fire and/or seriousinjury to the operator and/or bystanders.Save all warnings and instruc-tions for future reference.The term “brushcutter” and “machine” in the warningsand precautions refer to the combination of the attach-ment and the power unit.The term “motor” in the warnings and precautions refersto the engine or electric motor of the power unit.General safety1. First-time or inexperienced operator shouldask the dealer for training in all operation ofthe machine. Never allow children, personswith reduced physical, sensory or mentalcapabilities or lack of experience and knowl-edge or people unfamiliar with the instructionsto use the machine.2. It is recommended only to lend the machineto people who have proven to be experienced.Always hand over the instruction manual.3. Stay alert, watch what you are doing and usecommon sense when operating the machine.Do not use the machine while you are tired,ill, or under the influence of drugs, alcohol ormedication. A moment of inattention while oper-ating the machine may result in serious personalinjury.4. Avoid using the machine in bad weatherconditions especially when there is a risk oflightning.5. Follow your national and local regulation foruse of outdoor power machines.Intended use of machineThis machine is only intended for cutting grass,weeds, bushes and undergrowth. Never use themachine for any other purpose such as edging orhedge cutting. Use for unintended purpose may resultin serious injury.Personal protective equipment1. Always wear heavy, long pants, sturdy boots,gloves, and a long-sleeve shirt. Do not wearloose clothing, jewelry, short pants, sandals,or go barefoot. Secure hair so it is aboveshoulder level.2. Always wear a helmet where there is a risk offalling objects.3. Always wear protective goggles to protectyour eyes from injury when using the machine.The goggles must comply with ANSI Z87.1 inthe USA, EN 166 in Europe, or AS/NZS 1336in Australia/New Zealand. In Australia/NewZealand, it is legally required to wear a faceshield to protect your face, too.It is an employer's responsibility to enforcethe use of appropriate safety protective equip-ments by the tool operators and by other per-sons in the immediate working area.4. Wear ear protection, such as ear muffs.Exposure to noise can cause hearing loss.5. Always wear sturdy shoes with a non-slipsole. This protects your feet against injuries andensures a good footing.6. Wear a dust mask as necessary.Preparation before use1. Before use, always check the machine is safefor operation:— Check for fuel leaks.— Make sure all fasteners are in place andsecure.— Replace damaged parts.— Make sure the cutting tool is properlyinstalled and securely fastened.