15CORRECT HANDLING OF MACHINEAttachment of shoulder harnessAdjust the strap length so that the metal blade will be–kept parallel with the ground.For EM4351UH, EM4350UHHold the harness on your back, attach it with the buckle,and adjust the length of the bands.NOTE: Be careful not to trap clothing, etc., in the buckle.For EM4350LH1) Stand as the band plate closer to you. And let yourarms and head pass through the band.2) The band plate sits on your back and the adjustors andhook comes on the right side of your body when youappropriately equip the harness.Hanger2 kg maxReleasing the machineFor EM4351UH, EM4350UHTo release the machine, squeeze the sides of the buckle (1) and take off the–shoulder harness.Be extremely careful to maintain control of the machine at this time. Do notallow the machine to be deflected toward you or anyone in the work vicinity.WARNING: Failure to maintain complete control of the machine at all couldresult in serious bodily injury or DEATH.For EM4350LHTo release the machine, release the emergency detachment lever (2) by–pulling strongly with fingers.Be extremely careful to maintain control of the machine at this time. Do notallow the machine to be deflected toward you or anyone in the work vicinity.WARNING: Failure to maintain complete control of the machine at all couldresult in serious bodily injury or DEATH.Hanging ringFor EM4351UHYou can use the ring for hanging something weighing less than 2 kg (4.4 lbs).–NOTICE: Do not hang anything weighing more than 2 kg(4.4 lbs) on the ring.Anything heavier on the ring can cause it to fail and the item to bedamaged.CAUTION: Do not hang anything on the ring that can become entangled withbushes or shrubs. Entanglement can cause loss of balance andcontrol resulting in personal injury.BuckleBand plate(2)EM4351UHEM4350UHEM4351UHEM4350UHEM4351UHEM4350UHEM4350LHEM4351UHEM4350LH(1)