Makita ER2650LH Technical Information

Also see for ER2650LH: Original instruction manual Instruction manual Original instruction manual Instruction manual

[4] DISASSEMBLY/ASSEMBLY[4]-3. Shaft pipe completeDISASSEMBLINGASSEMBLING(1) Loosen two M5x25 Hex socket head bolts and remove Clamp cover B and Loop handle. (Fig. 7)(2) Remove 4x18 Tapping screws (4pcs) and M5x14 Hex socket head bolts,then separate Lever case R and L. (Fig. 8)Take the disassembling step in reverse.Fig. 74x18 Tapping screw(4pcs)Lever case setM5x14 Hex sockethead bolt (2pcs.)Fig. 8Shaft pipecompleteM5x25 Hex. sockethead bolt (2pcs.)Loop handleClamp cover BR epairP 4/ 14Fig. 9Shaft pipecompleteHex bolt1R308CutterassemblyCutter holderHead casecompleteProtector Hex sockethead boltM5x25Hex sockethead bolt[4] DISASSEMBLY/ASSEMBLY[4]-4. Head case completeDISASSEMBLING(1) Disassemble Protector and Head case complete. (Fig. 9)Shaft pipecompleteShaft pipecomplete(3) Disassemble Shaft pipe complete by following the disassembly step of the chapter [4]-2.(4) Pull out a shaft from Shaft pipe complete.1. Disassemble Protector by removingHex bolt (2pcs) and Hex socket bolt (1pc).2. Insert 1R308 in a hole on Cutter holder tolock shaft and remove Cutter assembly byturning it clockwise.3. Loosen M5x25 Hex socket head boltand remove Head case complete.