4ENGLISHExplanation of general view1-1. Lock ring2-1. Locator3-1. Locator4-1. Switch trigger4-2. Lock button5-1. Lamp6-1. Reversing switch lever7-1. Hook8-1. Lock ring8-2. Gear housing9-1. Locator9-2. Bit9-3. Gear housing9-4. Magnetic bit holder11-1. Lock button13-1. Lock button15-1. Swells15-2. Trapezoidal holes15-3. Locator holderSPECIFICATIONSModel FS4000 FS4200 FS4300/FS4300AFS6300/FS6300A FS6300RSelf drilling screw 6 mm 6 mm 6 mm - -Capacities Drywall screw 5 mm 5 mm 5 mm 4 mm 4 mmNo load speed (min -1) 0 - 4,000 0 - 4,000 0 - 4,000 0 - 6,000 0 - 6,000Overall length 269 mm 269 mm 279 mm 279 mm 279 mmNet weight 1.3 kg 1.4 kg 1.4 kg 1.4 kg 1.4 kgSafety class /II• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.• Specifications may differ from country to country.• Weight according to EPTA-Procedure 01/2003ENE033-1Intended useThe tool is intended for screw driving in wood, metal andplastic. ENF002-1Power supplyThe tool should be connected only to a power supply ofthe same voltage as indicated on the nameplate, andcan only be operated on single-phase AC supply. Theyare double-insulated in accordance with EuropeanStandard and can, therefore, also be used from socketswithout earth wire. ENG102-1For European countries onlyNoiseThe typical A-weighted noise level determined accordingto EN60745:Sound pressure level (LpA) : 82 dB(A)Sound power level (LWA) : 93 dB(A)Uncertainty (K) : 3 dB(A)Wear ear protection ENG204-2VibrationThe vibration total value (tri-axial vector sum)determined according to EN60745:Work mode: screwdriving without impactVibration emission (ah ) : 2.5 m/s 2 or lessUncertainty (K) : 1.5 m/s 2ENH101-10EC Declaration of ConformityWe Makita Corporation as the responsiblemanufacturer declare that the following Makitamachine(s):Designation of Machine: Drywall ScrewdriverModel No./ Type:FS4000,FS4200,FS4300,FS6300,FS6300Rare of series production andConforms to the following European Directives:98/37/EC until December 28th 2009 and then with2006/42/EC from 29th December 2009And are manufactured in accordance with the followingstandards or standardised documents:EN50144, EN60745The technical documentation is kept by our authorisedrepresentative in Europe who is:Makita International Europe Ltd,Michigan, Drive, Tongwell,Milton Keynes, MK15 8JD, England10 th September 2008000230Tomoyasu KatoDirectorMakita Corporation3-11-8, Sumiyoshi-cho,Anjo, Aichi, JAPAN