Makita GN900 Instruction Manual

Also see for GN900: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

Makita GN900 Instruction Manual Manual pdf 2 page image

2ENGLISH (Original instructions)SPECIFICATIONSModel GN900Nail length X Shank diameter Nail L :50 mm - 90 mm (2" - 3-1/2") d : 2.9 mm - 3.3 mm (0.113" - 0.131")Nail capacity 40 nails (1strip)Nail collation angle (degree) 34Figure of nail head ClippedDimensions (L X H X W) 321 mm (12-5/8") X 108 mm (4-1/4") X 368 mm (14-1/2")Net weight 3.3 kg (7.3 lbs.)Rated voltage D.C. 7.2 VStandard battery cartridges BL7010• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.• Specifications and battery cartridge may differ from country to country.• Weight, with battery cartridge, according to EPTA-Procedure 01/2003USD502-1SymbolsThe followings show the symbols used for tool.･ Read and understand tool labels andmanual.･ Operators and others in work area mustwear safety glasses with side shields.･ Keep fingers away from trigger when notdriving fasteners to avoid accidentalfiring.･ volts･ direct current･ Container under pressure, keep awayfrom temperatures over 50°C (for ex.sun radiation) Keep container in a wellventilated place.･ Use only outside or well ventilatedrooms. Do not breathe gas.･ Do not use near flames or sprays onheated surfaces. In use, may formflammable/explosive vapour-airmixture.･ Do not damage, puncture or burn evenafter use.･ Use only in ventilated area to avoidnausea and unconsciousness. Neveruse tool in combustible atmospheres.The tool exhaust may ignite flammablematerials.･ Do not use on scaffoldings, ladders.GEA006-2General Power Tool SafetyWarningsWARNING Read all safety warnings and allinstructions. Failure to follow the warnings andinstructions may result in electric shock, fire and/orserious injury.Save all warnings andinstructions for future reference.The term "power tool" in the warnings refers to yourmains-operated (corded) power tool or battery-operated(cordless) power tool.Work area safety1. Keep work area clean and well lit. Cluttered ordark areas invite accidents.2. Do not operate power tools in explosiveatmospheres, such as in the presence offlammable liquids, gases or dust. Power toolscreate sparks which may ignite the dust or fumes.3. Keep children and bystanders away whileoperating a power tool. Distractions can causeyou to lose control.Electrical Safety4. Power tool plugs must match the outlet. Nevermodify the plug in any way. Do not use anyadapter plugs with earthed (grounded) powertools. Unmodified plugs and matching outlets willreduce risk of electric shock.5. Avoid body contact with earthed or groundedsurfaces such as pipes, radiators, ranges andrefrigerators. There is an increased risk ofelectric shock if your body is earthed or grounded.6. Do not expose power tools to rain or wetconditions. Water entering a power tool willincrease the risk of electric shock.