Makita HM1201 Instruction Manual

Also see for HM1201: Instruction manual

Contents

Makita HM1201 Instruction Manual Manual pdf 4 page image

4SAVE THESE INSTRUCTIONS.WARNING:DO NOT let comfort or familiarity with product(gained from repeated use) replace strict adherenceto safety rules for the subject product.MISUSE or failure to follow the safety rules stated inthis instruction manual may cause serious personalinjury.FUNCTIONAL DESCRIPTIONCAUTION:• Always be sure that the tool is switched off andunplugged before adjusting or checking function onthe tool.Switch action1003502CAUTION:• Before plugging in the tool, always check to seethat the switch trigger actuates properly and returnsto the "OFF" position when released.• Do not tape, tie or otherwise secure the switchtrigger in the "ON" position.To start the tool, simply pull the switch trigger. Releasethe switch trigger to stop.ASSEMBLYCAUTION:• Always be sure that the tool is switched off andunplugged before carrying out any work on the tool.Installing side grip (auxiliary handle)1002900The side grip swings around to either side, allowing easyhandling of the tool in any position. Loosen the side gripby turning it counterclockwise, swing it to the desiredposition and then tighten it by turning clockwise.Installing or removing the bit12004870Pivot the tool retainer to the side.(If it is difficult to movethe tool retainer with your thumbs, tap it with a hammer.)Insert the bit into the tool barrel as far as it will go. Returnthe tool retainer to its original position to secure the bit.To remove the bit, follow the installation procedure inreverse.OPERATIONChipping/Scaling/Demolition003205Hold the tool firmly with both hands. Turn the tool on andapply slight pressure on the tool so that the tool will notbounce around, uncontrolled. Pressing very hard on thetool will not increase the efficiency.MAINTENANCECAUTION:• Always be sure that the tool is switched off andunplugged before attempting to perform inspectionor maintenance.• Never use gasoline, benzine, thinner, alcohol or thelike. Discoloration, deformation or cracks mayresult.1. Bull point2. Tool retainer1. Side grip1. Switch trigger