Makita HM1214C Instruction Manual
Also see for HM1214C: Instruction manualInstruction manualInstruction manualInstruction manualInstruction manual
        | |
2ENGLISH (Original instructions)SPECIFICATIONSModel HM1214CBlows per minute 950 - 1,900 min -1Overall length 700 mmNet weight 12.3 kgSafety class II• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.• Note: Specifications may differ from country to country.• Weight according to EPTA-Procedure 01/2003END201-5SymbolsThe following show the symbols used for the equipment.Be sure that you understand their meaning before use.･ Read instruction manual.･ DOUBLE INSULATION･ Only for EU countriesDo not dispose of electric equipmenttogether with household waste material!In observance of European Directive2002/96/EC on waste electric andelectronic equipment and itsimplementation in accordance withnational law, electric equipment thathave reached the end of their life mustbe collected separately and returned toan environmentally compatible recyclingfacility. ENE045-1Intended useThe tool is intended for chiselling work in concrete, brick,stone and asphalt as well as for driving and compactingwith appropriate accessories. ENF002-2Power supplyThe tool should be connected only to a power supply ofthe same voltage as indicated on the nameplate, and canonly be operated on single-phase AC supply. They aredouble-insulated and can, therefore, also be used fromsockets without earth wire. ENG905-1NoiseThe typical A-weighted noise level determined accordingto EN60745:Sound pressure level (LpA) : 78 dB(A)Sound power level (LWA) : 98 dB(A)Uncertainty (K) : 2.57 dB(A)Wear ear protectionENG900-1VibrationThe vibration total value (tri-axial vector sum) determinedaccording to EN60745:Work mode : chiselingVibration emission (ah,CHeq ) : 8.0 m/s2Uncertainty (K) : 1.5 m/s 2ENG901-1• The declared vibration emission value has beenmeasured in accordance with the standard testmethod and may be used for comparing one toolwith another.• The declared vibration emission value may also beused in a preliminary assessment of exposure.WARNING:• The vibration emission during actual use of thepower tool can differ from the declared emissionvalue depending on the ways in which the tool isused.• Be sure to identify safety measures to protect theoperator that are based on an estimation ofexposure in the actual conditions of use (takingaccount of all parts of the operating cycle such asthe times when the tool is switched off and when itis running idle in addition to the trigger time).ENH212-11For European countries onlyEC Declaration of ConformityWe Makita Corporation as the responsiblemanufacturer declare that the following Makitamachine(s):Designation of Machine:Demolition HammerModel No./ Type: HM1214CSpecifications: see "SPECIFICATIONS" table.are of series production andConforms to the following European Directives:2000/14/EC, 2006/42/EC |
Related manuals for Makita HM1214C
Makita HM1214C Instruction Manual
Makita HM1214C Instruction Manual
Makita HM1214C Instruction Manual
Makita HM1214C Instruction Manual
Makita HM1214C Instruction Manual
Makita HM1214C Instruction Manual
Makita HM1214C Instruction Manual
Makita HM1214C Instruction Manual
Makita HM1213C Instruction Manual
Makita HM1213C Instruction Manual
This manual is suitable for:
manualsdatabase
Your AI-powered manual search engine