Makita HM1214C Instruction Manual

Also see for HM1214C: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

Makita HM1214C Instruction Manual Manual pdf 4 page image

4 ENGLISHENGLISH (Original instructions)SPECIFICATIONSModel HM1214CBlows per minute 950 - 1,900 min -1Overall length 700 mmNet weight 12.3 kgSafety class II• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.• Note: Specifications may differ from country to country.• Weight according to EPTA-Procedure 01/2003Intended useThe tool is intended for chiselling work in concrete,brick, stone and asphalt as well as for driving and com-pacting with appropriate accessories.Power supplyThe tool should be connected only to a power supply ofthe same voltage as indicated on the nameplate, andcan only be operated on single-phase AC supply. Theyare double-insulated and can, therefore, also be usedfrom sockets without earth wire.NoiseThe typical A-weighted noise level determined accord-ing to EN60745:Sound pressure level (LpA ) : 78 dB(A)Sound power level (LWA ) : 98 dB(A)Uncertainty (K) : 2.57 dB(A)Wear ear protectionVibrationThe vibration total value (tri-axial vector sum) deter-mined according to EN60745:Work mode : chisellingVibration emission (ah,CHeq) : 8.0 m/s2Uncertainty (K) : 1.5 m/s2NOTE: The declared vibration emission value hasbeen measured in accordance with the standard testmethod and may be used for comparing one tool withanother.NOTE: The declared vibration emission valuemay also be used in a preliminary assessment ofexposure.WARNING: The vibration emission during actualuse of the power tool can differ from the declaredemission value depending on the ways in which thetool is used.WARNING: Be sure to identify safety measuresto protect the operator that are based on an estima-tion of exposure in the actual conditions of use (takingaccount of all parts of the operating cycle such asthe times when the tool is switched off and when it isrunning idle in addition to the trigger time).For European countries onlyEC Declaration of ConformityWe Makita Corporation as the responsible manufac-turer declare that the following Makita machine(s):Designation of Machine:Demolition HammerModel No./ Type: HM1214CSpecifications: see "SPECIFICATIONS" table.are of series production andConforms to the following European Directives:2000/14/EC, 2006/42/ECAnd are manufactured in accordance with the followingstandards or standardised documents:EN60745The technical documentation is kept by our authorisedrepresentative in Europe who is:Makita International Europe Ltd.Michigan Drive, Tongwell,Milton Keynes, Bucks MK15 8JD, EnglandThe conformity assessment procedure required byDirective 2000/14/EC was in Accordance with annex VIII.Notified Body:TÜV Rheinland LGA Products GmbHTillystraße 2D-90431 NürnbergIdentification number 0197Measured Sound Power Level: 98dB(A)Guaranteed Sound Power Level: 100dB(A)10.8.2010Tomoyasu KatoDirectorMakita Corporation3-11-8, Sumiyoshi-cho,Anjo, Aichi, 446-8502, JAPANGeneral Power Tool Safety WarningsWARNING Read all safety warnings and all instruc-tions. Failure to follow the warnings and instructions mayresult in electric shock, fire and/or serious injury.Save all warnings and instructions forfuture reference.

/ 32

Related manuals for Makita HM1214C

Makita HM1214C Instruction Manual

Makita HM1213C Instruction Manual

This manual is suitable for:

HM1214C

manualsdatabase

Your AI-powered manual search engine