Makita HM1317C Technical Information

Also see for HM1307C: Instruction manual Instruction manual Instruction manual Instruction manual Instruction mamual

Contents

Makita HM1317C Technical Information Manual pdf 8 page image

P 8/ 19Repair[3] DISASSEMBLY/ASSEMBLY[3]-4. AVT Mechanism of HM1317C and HM1317CBDISASSEMBLINGFig. 13Fig. 14(1) Disassemble Handle section as illustrated in Fig. 4 and stand the machine as illustrated in Fig.5.(2) Disassemble Cylinder 52 from Crank housing. (Figs. 13 and 14)Note in disassemblyNo need to remove two O rings 45from Cylinder 52 for disassemblingAVT mechanism.Do not lay the machine when removing Cylinder 52.(Pin 6 for AVT mechanism falls off Crank housingby laying the machine.)Remove four M8x40 Hex sockethead bolts with Hex wrench 6.And separate Barrel section fromCrank housing complete.Put 1R023 on Crank housing complete and then lever up Cylinder 52 using theend of 1R023 and a couple of 1R263.Striker and O ring 42 can be removed.BarrelsectionPipe asextensionbarHexwrench 6 1R023Cylinder 52 1R2631R263Cylinder 52StrikerO ring 421R023Pin 6Also in case of HM1307C, HM1307CB (without AVT. mechanism), Cylinder section can be removed using 1R023 and1R263 as illustrated in Fig. 14.O ring 45 (2pcs.)Rear cover (with AVT.mark)Crank housing complete