Makita HM1810 Instruction Manual

Also see for HM1810: Parts Breakdown Instruction manual Parts Breakdown Instruction manual Instruction manual

Contents

Makita HM1810 Instruction Manual Manual pdf 6 page image

6failure. Fill only with the specified amount of grease.(Fig. 12)Reinstall the cap and secure with the wrench.To maintain product SAFETY and RELIABILITY, repairs,any other maintenance or adjustment should beperformed by Makita Authorized Service Centers, alwaysusing Makita replacement parts.OPTIONAL ACCESSORIESCAUTION:• These accessories or attachments are recommendedfor use with your Makita tool specified in this manual.The use of any other accessories or attachments mightpresent a risk of injury to persons. Only use accessoryor attachment for its stated purpose.If you need any assistance for more details regardingthese accessories, ask your local Makita Service Center.• Bull point• Cold chisel• Scaling chisel• Clay spade• Rammer• Safety goggles• Hammer grease• Hex wrench• Lock nut wrenchNOTE:• Some items in the list may be included in the toolpackage as standard accessories. They may differfrom country to country.Noise ENG905-1The typical A-weighted noise level determined accordingto EN60745:Model HM1801Sound pressure level (L pA ): 84 dB (A)Sound power level (L WA ): 104 dB (A)Uncertainty (K): 2.30 dB (A)Model HM1810Sound pressure level (L pA ): 84 dB (A)Sound power level (L WA ): 104 dB (A)Uncertainty (K): 2.52 dB (A)Wear ear protection.Vibration ENG900-1The vibration total value (tri-axial vector sum) determinedaccording to EN60745:Model HM1801Work mode: chiselingVibration emission (ah,CHeq): 14.0 m/s2Uncertainty (K): 1.5 m/s 2Model HM1810Work mode: chiselingVibration emission (ah,CHeq): 9.0 m/s 2Uncertainty (K): 1.5 m/s 2ENG901-1• The declared vibration emission value has beenmeasured in accordance with the standard test methodand may be used for comparing one tool with another.• The declared vibration emission value may also beused in a preliminary assessment of exposure.WARNING:• The vibration emission during actual use of the powertool can differ from the declared emission valuedepending on the ways in which the tool is used.• Be sure to identify safety measures to protect theoperator that are based on an estimation of exposure inthe actual conditions of use (taking account of all partsof the operating cycle such as the times when the toolis switched off and when it is running idle in addition tothe trigger time).For European countries only ENH213-6EC Declaration of ConformityWe Makita Corporation as the responsiblemanufacturer declare that the following Makitamachine(s):Designation of Machine: Electric BreakerModel No./ Type: HM1801, HM1810Specifications: see “SPECIFICATIONS” table.are of series production andConforms to the following European Directives:2000/14/EC, 2006/42/ECAnd are manufactured in accordance with the followingstandards or standardised documents:EN60745The technical documentation is kept by our authorisedrepresentative in Europe who is:Makita International Europe Ltd.Michigan Drive, Tongwell,Milton Keynes, Bucks MK15 8JD, EnglandThe conformity assessment procedure required byDirective 2000/14/EC was in Accordance with annex VIII.Notified Body:TÜV Rheinland LGA Products GmbHTillystraße 2D-90431 NürnbergIdentification number 0197Model HM1801Measured Sound Power Level: 104 dB (A)Guaranteed Sound Power Level: 106 dB (A)Model HM1810Measured Sound Power Level: 104 dB (A)Guaranteed Sound Power Level: 107 dB (A)10. 8. 2010Tomoyasu KatoDirectorMakita Corporation3-11-8, Sumiyoshi-cho,Anjo, Aichi, 446-8502, JAPAN