Makita HP1630 Instruction Manual

Also see for HP1630: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

4only when hand-held.8. Do not touch the bit or the workpieceimmediately after operation; they may beextremely hot and could burn your skin.9. Some material contains chemicals which maybe toxic. Take caution to prevent dustinhalation and skin contact. Follow materialsupplier safety data.SAVE THESE INSTRUCTIONS.WARNING:MISUSE or failure to follow the safety rules stated inthis instruction manual may cause serious personalinjury.FUNCTIONAL DESCRIPTIONCAUTION:• Always be sure that the tool is switched off andunplugged before adjusting or checking function onthe tool.Switch action12008893CAUTION:• Before plugging in the tool, always check to seethat the switch trigger actuates properly andreturns to the "OFF" position when released.• Switch can be locked in "ON" position for ease ofoperator comfort during extended use. Applycaution when locking tool in "ON" position andmaintain firm grasp on tool.To start the tool, simply pull the switch trigger. Toolspeed is increased by increasing pressure on the switchtrigger. Release the switch trigger to stop.For continuous operation, pull the switch trigger andthen push in the lock button.To stop the tool from the locked position, pull the switchtrigger fully, then release it.Reversing switch actionAB1008898This tool has a reversing switch to change the directionof rotation. Move the reversing switch to the position(A side) for clockwise rotation or the position (B side)for counterclockwise rotation.CAUTION:• Always check the direction of rotation beforeoperation.• Use the reversing switch only after the tool comesto a complete stop. Changing the direction ofrotation before the tool stops may damage the tool.• If the switch trigger can not be depressed, check tosee that the reversing switch is fully set toposition (A side) or (B side).Selecting the action mode1008894This tool has an action mode change lever. For rotationwith hammering, slide the action mode change lever tothe right ( symbol). For rotation only, slide the actionmode change lever to the left ( symbol).CAUTION:• Always slide the action mode change lever all theway to your desired mode position. If you operatethe tool with the lever positioned halfway betweenthe mode symbols, the tool may be damaged.1. Action modechange lever1. Reversingswitch lever1. Switch trigger2. Lock button

/ 8

Related manuals for Makita HP1630

Makita HP1630 Instruction Manual

This manual is suitable for:

HP1630 HP1631

manualsdatabase

Your AI-powered manual search engine