[3] DISASSEMBLY/ASSEMBLY[3] -2. Gear assembly, Motor section (cont.)ASSEMBLING(3) Before setting Gear assembly and DC motor, take the following step in Fig. 12.(4) Setting Gear assembly and DC motor to Housing L, fasten Housing R with six 3x16 Tapping screws. (Fig. 13)Fig. 12Fig. 131. Mount F/R change lever to Switch, by fitting this prong tothe projection on Switch. And set Switch to Housing L.Projection2. Set Leaf spring in place.Note: Do not face the center edge ofLeaf spring to Housing L.Housing LLeaf spring(5) Set Drill chuck in place. (Figs. 5, 6, 7)R epairP 7/ 11Leaf springCenter edge

Makita HP330D Technical Information

specifications

functional description

optional accessories