Makita HR1830F Instruction Manual

Also see for HR1830: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

2ENGLISHSPECIFICATIONS• Due to our continuing programme of research and development, the specifications herein are subject to changewithout notice.• Note: Specifications may differ from country to country.GENERAL SAFETY RULESUSA002-2(For All Tools)WARNING:Read and understand all instructions.Failure to follow all instructions listed below,may result in electric shock, fire and/or seri-ous personal injury.SAVE THESE INSTRUCTIONSWork Area1. Keep your work area clean and well lit. Clutteredbenches and dark areas invite accidents.2. Do not operate power tools in explosive atmo-spheres, such as in the presence of flammableliquids, gases, or dust. Power tools create sparkswhich may ignite the dust or fumes.3. Keep bystanders, children, and visitors awaywhile operating a power tool. Distractions cancause you to lose control.Electrical Safety4. Double insulated tools are equipped with apolarized plug (one blade is wider than theother.) This plug will fit in a polarized outlet onlyone way. If the plug does not fit fully in the outlet,reverse the plug. If it still does not fit, contact aqualified electrician to install a polarized outlet.Do not change the plug in any way. Double insula-tion eliminates the need for the three wiregrounded power cord and grounded power supplysystem.5. Avoid body contact with grounded surfacessuch as pipes, radiators, ranges and refrigera-tors. There is an increased risk of electric shock ifyour body is grounded.6. Do not expose power tools to rain or wet condi-tions. Water entering a power tool will increase therisk of electric shock.7. Do not abuse the cord. Never use the cord tocarry the tools or pull the plug from an outlet.Keep cord away from heat, oil, sharp edges ormoving parts. Replace damaged cords immedi-ately. Damaged cords increase the risk of electricshock.8. When operating a power tool outside, use anoutdoor extension cord marked “W-A” or “W”.These cords are rated for outdoor use and reducethe risk of electric shock.Personal Safety9. Stay alert, watch what you are doing and usecommon sense when operating a power tool. Donot use tool while tired or under the influence ofdrugs, alcohol, or medication. A moment of inat-tention while operating power tools may result inserious personal injury.10. Dress properly. Do not wear loose clothing orjewelry. Contain long hair. Keep your hair, cloth-ing, and gloves away from moving parts. Looseclothes, jewelry, or long hair can be caught in mov-ing parts.11. Avoid accidental starting. Be sure switch is offbefore plugging in. Carrying tools with your fingerModel HR1830 / HR1830FCapacitiesConcrete 18 mm (11/16”)Core bit 35 mm (1-3/8”)Diamond core bit (dry type) 65 mm (2-9/16”)Steel 13 mm (1/2”)Wood 24 mm (15/16”)No load speed (RPM) 0 - 1,500/min.Blows per minute 0 - 5,000Overall length 279 mm (10-7/8”)Net weight 1.7 kg (3.7 lbs)

/ 28

Related manuals for Makita HR1830

Makita HR1830 Instruction Manual

Makita HR1840 Instruction Manual

This manual is suitable for:

HR1830 HR1830F

manualsdatabase

Your AI-powered manual search engine