5ENGLISH (Original instructions)Explanation of general view1-1. Switch trigger1-2. Lock button2-1. Lamp3-1. Reversing switch lever4-1. Quick change chuck for SDS-plus4-2. Change cover line4-3. Change cover5-1. Spindle5-2. Quick change drill chuck5-3. Change cover line5-4. Change cover6-1. Rotation with hammering6-2. Rotation only6-3. Action mode changing knob7-1. Rotation with hammering7-2. Action mode changing knob8-1. Rotation only9-1. Hammering only10-1. Protrusions10-2. Grooves11-1. Bit shank11-2. Bit grease12-1. Bit13-1. Bit13-2. Chuck cover14-1. Action mode changing knob16-1. Grip base16-2. Lock button16-3. Depth gauge17-1. Toothed side of hex hole markingon the grip base17-2. Toothed side of the depth gauge18-1. Lock button19-1. Toothed side of hex hole markingon the grip base19-2. Toothed side of the depth gauge20-1. Dust cup21-1. symbol21-2. Grooves21-3. Dust cup22-1. Bit22-2. Chuck cover23-1. Attachment at the foot of dust cup24-1. Bellows24-2. Attachment25-1. Inside periphery25-2. Carved side25-3. Attachment25-4. Cap25-5. Groove26-1. Cap26-2. Attachment29-1. Blow-out bulb31-1. Chuck adapter31-2. Keyless drill chuck32-1. Quick change chuck for SDS-plus32-2. Change cover line32-3. Change cover33-1. Spindle33-2. Quick change drill chuck33-3. Change cover line33-4. Change cover34-1. Sleeve34-2. Ring34-3. Quick change drill chuck35-1. Dust capSPECIFICATIONSModel HR2300 HR2310T HR2600 HR2601 HR2610 HR2610T HR2611F HR2611FTConcrete 23 mm 26 mmCore bit 68 mm 68 mm 68 mmDiamond core bit (dry type) 70 mm 80 mm 80 mmSteel 13 mm 13 mm 13 mmCapacitiesWood 32 mm 32 mm 32 mmNo load speed (min -1) 0 - 1,200Blows per minute 0 - 4,600Overall length 356 mm 380 mm 361 mm 385 mm 361 mm 385 mmNet weight 2.7 kg 2.9 kg 2.8 kg 2.9 kg 2.8 kg 2.9 kg 2.9 kg 3.0 kgSafety class /II• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.• Specifications may differ from country to country.• Weight according to EPTA-Procedure 01/2003ENE042-1Intended useThe tool is intended for hammer drilling and drilling inbrick, concrete and stone.It is also suitable for drilling without impact in wood, metal,ceramic and plastic.ENF002-2Power supplyThe tool should be connected only to a power supply ofthe same voltage as indicated on the nameplate, and canonly be operated on single-phase AC supply. They aredouble-insulated and can, therefore, also be used fromsockets without earth wire.