Makita HR2440 Instruction Manual

Also see for HR2440: Instruction manual Instruction manual Instruction manual

Contents

Makita HR2440 Instruction Manual Manual pdf 2 page image

2ENGLISH (Original instructions)SPECIFICATIONSModel HR2440/HR2440F HR2441 HR2442Tungsten-carbide tipped bit 24 mm 24 mm 24 mmCore bit 54 mm 54 mm 54 mmConcreteDiamond core bit (dry type) 65 mm 65 mm 65 mmSteel 13 mm 13 mm 13 mmCapacitiesWood 32 mm 32 mm 32 mmNo load speed (min -1) 0 - 1,100 0 - 1,100 1,100Blows per minute 0 - 4,500 0 - 4,500 4,500Overall length 352 mm 352 mm 352 mmNet weight 2.6 kg 2.6 kg 2.6 kgSafety class /II• Due to our continuing programme of research and development, the specifications herein are subject to change without notice.• Specifications may differ from country to country.• Weight according to EPTA-Procedure 01/2003END201-5SymbolsThe following show the symbols used for the equipment.Be sure that you understand their meaning before use.･ Read instruction manual.･ DOUBLE INSULATION･ Only for EU countriesDo not dispose of electric equipmenttogether with household waste material!In observance of European Directive2002/96/EC on waste electric andelectronic equipment and itsimplementation in accordance withnational law, electric equipment thathave reached the end of their life mustbe collected separately and returned toan environmentally compatiblerecycling facility. ENE042-1Intended useThe tool is intended for hammer drilling and drilling inbrick, concrete and stone.It is also suitable for drilling without impact in wood,metal, ceramic and plastic. ENF002-2Power supplyThe tool should be connected only to a power supply ofthe same voltage as indicated on the nameplate, andcan only be operated on single-phase AC supply. Theyare double-insulated and can, therefore, also be usedfrom sockets without earth wire.GEA005-3General Power Tool SafetyWarningsWARNING Read all safety warnings and allinstructions. Failure to follow the warnings andinstructions may result in electric shock, fire and/orserious injury.Save all warnings andinstructions for future reference.The term "power tool" in the warnings refers to yourmains-operated (corded) power tool or battery-operated(cordless) power tool.Work area safety1. Keep work area clean and well lit. Cluttered ordark areas invite accidents.2. Do not operate power tools in explosiveatmospheres, such as in the presence offlammable liquids, gases or dust. Power toolscreate sparks which may ignite the dust or fumes.3. Keep children and bystanders away whileoperating a power tool. Distractions can causeyou to lose control.Electrical safety4. Power tool plugs must match the outlet. Nevermodify the plug in any way. Do not use anyadapter plugs with earthed (grounded) powertools. Unmodified plugs and matching outlets willreduce risk of electric shock.5. Avoid body contact with earthed or groundedsurfaces such as pipes, radiators, ranges andrefrigerators. There is an increased risk ofelectric shock if your body is earthed or grounded.