2ENGLISH (Original instructions)SPECIFICATIONSModel HR2631F HR2631FT HR2641 HR2320T HR2630 HR2630TConcrete 26 mm 23 mm 26 mmCore bit 68 mmDiamond core bit (dry type) 80 mm 70 mm 80 mmSteel 13 mmCapacitiesWood 32 mmNo load speed 0 - 1,200 min -1 0 - 1,100min -1 0 - 1,200 min -1Blows per minute 0 - 4,600 min -1 0 - 4,500min -1 0 - 4,600 min -1Overall length 361 mm 385 mm 422 mm 380 mm 361 mm 385 mmNet weight 2.9 kg 3.1 kg 2.9 kg 2.8 kg 3.0 kgSafety class /II• Due to our continuing program of research and development, the specifications herein are subject to change without notice.• Specifications may differ from country to country.• Weight according to EPTA-Procedure 01/2003END201-7SymbolsThe following show the symbols used for the equipment.Be sure that you understand their meaning before use.・ Read instruction manual.・ DOUBLE INSULATION・ Only for EU countriesDo not dispose of electric equipmenttogether with household waste material!In observance of the EuropeanDirective, on Waste Electric andElectronic Equipment and itsimplementation in accordance withnational law, electric equipment thathave reached the end of their life mustbe collected separately and returned toan environmentally compatiblerecycling facility. ENE042-1Intended useThe tool is intended for hammer drilling and drilling inbrick, concrete and stone.It is also suitable for drilling without impact in wood,metal, ceramic and plastic. ENF002-2Power supplyThe tool should be connected only to a power supply ofthe same voltage as indicated on the nameplate, andcan only be operated on single-phase AC supply. Theyare double-insulated and can, therefore, also be usedfrom sockets without earth wire.ENG905-1NoiseThe typical A-weighted noise level determinedaccording to EN60745:Model HR2631F, HR2631FT, HR2641Sound pressure level (LpA) : 90 dB (A)Sound power level (LWA) : 101 dB (A)Uncertainty (K) : 3 dB (A)Model HR2320T, HR2630, HR2630TSound pressure level (LpA) : 91 dB (A)Sound power level (LWA) : 102 dB (A)Uncertainty (K) : 3 dB (A)Wear ear protectionENG900-1VibrationThe vibration total value (tri-axial vector sum)determined according to EN60745:Model HR2631FWork mode : hammer drilling into concreteVibration emission (ah,HD) : 12.0 m/s 2Uncertainty (K) : 1.5 m/s 2Work mode : chiselling function with side gripVibration emission (ah,Cheq ) : 9.0 m/s 2Uncertainty (K) : 1.5 m/s 2Work mode: drilling into metalVibration emission (ah,D) : 2.5 m/s 2 or lessUncertainty (K) : 1.5 m/s 2