Makita HR2631F Instruction Manual

Also see for HR2630: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

Contents

Makita HR2631F Instruction Manual Manual pdf 4 page image

4GEB007-7ROTARY HAMMER SAFETYWARNINGS1. Wear ear protectors. Exposure to noise cancause hearing loss.2. Use auxiliary handle(s), if supplied with thetool. Loss of control can cause personal injury.3. Hold power tool by insulated gripping surfaces,when performing an operation where the cuttingaccessory may contact hidden wiring or its owncord. Cutting accessory contacting a "live" wire maymake exposed metal parts of the power tool "live"and could give the operator an electric shock.4. Wear a hard hat (safety helmet), safetyglasses and/or face shield. Ordinary eye orsun glasses are NOT safety glasses. It is alsohighly recommended that you wear a dustmask and thickly padded gloves.5. Be sure the bit is secured in place before operation.6. Under normal operation, the tool is designed toproduce vibration. The screws can come looseeasily, causing a breakdown or accident. Checktightness of screws carefully before operation.7. In cold weather or when the tool has not beenused for a long time, let the tool warm up for awhile by operating it under no load. This willloosen up the lubrication. Without properwarm-up, hammering operation is difficult.8. Always be sure you have a firm footing.Be sure no one is below when using the toolin high locations.9. Hold the tool firmly with both hands.10. Keep hands away from moving parts.11. Do not leave the tool running. Operate the toolonly when hand-held.12. Do not point the tool at any one in the areawhen operating. The bit could fly out andinjure someone seriously.13. Do not touch the bit or parts close to the bitimmediately after operation; they may beextremely hot and could burn your skin.14. Some material contains chemicals which may betoxic. Take caution to prevent dust inhalation andskin contact. Follow material supplier safety data.SAVE THESE INSTRUCTIONS.WARNING:DO NOT let comfort or familiarity with product (gainedfrom repeated use) replace strict adherence to safetyrules for the subject product. MISUSE or failure tofollow the safety rules stated in this instructionmanual may cause serious personal injury.FUNCTIONAL DESCRIPTIONCAUTION:• Always be sure that the tool is switched off andunplugged before adjusting or checking functionon the tool.Switch actionCAUTION:• Before plugging in the tool, always check to seethat the switch trigger actuates properly andreturns to the "OFF" position when released.1201533612015360To start the tool, simply pull the switch trigger. Toolspeed is increased by increasing pressure on the switchtrigger. Release the switch trigger to stop. Forcontinuous operation, pull the switch trigger, push in thelock button and then release the switch trigger. To stopthe tool from the locked position, pull the switch triggerfully, then release it.Lighting up the lampsFor Model HR2631F, HR2631FTCAUTION:• Do not look in the light or see the source of lightdirectly.1. Switch trigger2. Lock button1. Switch trigger2. Lock button