Makita HR3200C Instruction Manual

Also see for HR3200C: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

5ENGLISH (Original instructions)Explanation of general viewSPECIFICATIONS• Due to our continuing program of research and development, the specifications herein are subject to change withoutnotice.• Specifications may differ from country to country.• The weight may differ depending on the attachment(s). The lightest and heaviest combination, according to EPTA-Procedure 01/2014, are shown in the table.Intended use ENE044-1The tool is intended for hammer drilling in brick, concreteand stone as well as for chiselling work.Power supply ENF002-2The tool should be connected only to a power supply ofthe same voltage as indicated on the nameplate, and canonly be operated on single-phase AC supply. They aredouble-insulated and can, therefore, also be used fromsockets without earth wire.General power tool safetywarnings GEA010-2WARNING: Read all safety warnings, instructions,illustrations and specifications provided with thispower tool. Failure to follow all instructions listed belowmay result in electric shock, fire and/or serious injury.Save all warnings andinstructions for future reference.The term “power tool” in the warnings refers to yourmains-operated (corded) power tool or battery-operated(cordless) power tool.ROTARY HAMMER SAFETYWARNINGS GEB243-1Safety instructions for all operations1. Wear ear protectors. Exposure to noise can causehearing loss.2. Use auxiliary handle(s), if supplied with the tool.Loss of control can cause personal injury.3. Hold the power tool by insulated grippingsurfaces, when performing an operation where thecutting accessory may contact hidden wiring or itsown cord. Cutting accessory contacting a "live" wiremay make exposed metal parts of the power tool "live"and could give the operator an electric shock.Safety instructions when using long drill bits withrotary hammers1. Always start drilling at low speed and with the bittip in contact with the workpiece. At higher speeds,the bit is likely to bend if allowed to rotate freelywithout contacting the workpiece, resulting in personalinjury.2. Apply pressure only in direct line with the bit anddo not apply excessive pressure. Bits can bend,causing breakage or loss of control, resulting inpersonal injury.Additional safety warnings1. Wear a hard hat (safety helmet), safety glassesand/or face shield. Ordinary eye or sun glasses1. Switch trigger2. Lamp3. Adjusting dial4. Quick change chuck for SDS-plus5. Change cover6. Chuck cover7. Spindle8. Quick change drill chuck9. Lock button10. Pointer11. Change lever12. Power-ON indicator lamp (green)13. Service indicator lamp (red)14. Side grip15. Bit shank16. Bit grease17. Bit18. Depth gauge19. Clamp screw20. Dust cup21. Blow-out bulb22. Chuck adapter23. Keyless drill chuck24. Sleeve25. RingModel HR3200C HR3210C HR3210FCTCapacitiesConcrete Tungsten-carbide tipped bit 32 mmCore bit 90 mmSteel 13 mmWood 32 mmNo load speed (min -1 ) 315 - 630Blows per minute 1,650 - 3,300Overall length 398 mm 424 mmNet weight 4.8 - 5.2 kg 5.2 - 5.6 kg 5.4 - 5.6 kgSafety class /II

/ 60

Related manuals for Makita HR3200C

Makita HR3200C Instruction Manual

This manual is suitable for:

HR3200C HR3210C HR3210FCT

manualsdatabase

Your AI-powered manual search engine