Makita HR4501C Instruction Manual

Also see for HR4501C: Instruction manual Brochure & specs Instruction manual Instruction manual Instruction manual

Contents

functional description

5ENG306-1Work mode : chiseling function with side gripVibration emission (ah,CHeq ) : 12.5 m/s2Uncertainty (K) : 1.5 m/s 2ENG303-1Work mode : hammer drilling into concrete, 25 mmdiameter and 180: mm depthVibration emission (ah,HD) : 16 m/s 2Uncertainty (K) : 1.5 m/s 2For Model HR4510C ENG102-1For European countries onlyNoiseThe typical A-weighted noise level determined accordingto 60745-2-6:Sound pressure level (LpA) : 93 dB(A)Sound power level (LWA) : 104 dB(A)Uncertainty (K) : 3 dB(A)Wear ear protection ENG216-1VibrationThe vibration total value (tri-axial vector sum)determined according to EN60745-2-6:Work mode : chiseling function with side handleVibration emission (ah,CHeq ) : 8.5 m/s2Uncertainty (K) : 1.5 m/s 2ENG306-1Work mode : chiseling function with side gripVibration emission (ah,CHeq ) : 8.5 m/s2Uncertainty (K) : 1.5 m/s 2ENG303-1Work mode : hammer drilling into concrete, 25 mmdiameter and 180: mm depthVibration emission (ah,HD) : 9.5 m/s 2Uncertainty (K) : 2 m/s 2For Model HR4511C ENG102-1For European countries onlyNoiseThe typical A-weighted noise level determined accordingto 60745-2-6:Sound pressure level (LpA) : 94 dB(A)Sound power level (LWA) : 105 dB(A)Uncertainty (K) : 3 dB(A)Wear ear protection ENG216-1VibrationThe vibration total value (tri-axial vector sum)determined according to EN60745-2-6:Work mode : chiseling function with side handleVibration emission (ah,CHeq ) : 7 m/s 2Uncertainty (K) : 1.5 m/s 2ENG306-1Work mode : chiseling function with side gripVibration emission (ah,CHeq ) : 7.5 m/s2Uncertainty (K) : 1.5 m/s 2ENG303-1Work mode : hammer drilling into concrete, 25 mmdiameter and 180: mm depthVibration emission (ah,HD) : 7.5 m/s 2Uncertainty (K) : 1.5 m/s 2ENH101-8EC-DECLARATION OF CONFORMITYModel; HR4501C,HR4510C,HR4511CWe declare under our sole responsibility that thisproduct is in compliance with the following standards ofstandardized documents;EN60745, EN55014, EN61000 in accordance withCouncil Directives, 2004/108/EC, 98/37/EC.CE2007000230Tomoyasu KatoDirectorResponsible Manufacturer:Makita Corporation3-11-8, Sumiyoshi-cho, Anjo, Aichi, JAPANAuthorized Representative in Europe:Makita International Europe Ltd.Michigan Drive, Tongwell, Milton Keynes, Bucks MK158JD, ENGLAND GEB007-2SPECIFIC SAFETY RULESDO NOT let comfort or familiarity with product(gained from repeated use) replace strict adherenceto rotary hammer safety rules. If you use this toolunsafely or incorrectly, you can suffer seriouspersonal injury.1. Wear ear protectors. Exposure to noise cancause hearing loss.2. Use auxiliary handles supplied with the tool.Loss of control can cause personal injury.3. Hold power tools by insulated grippingsurfaces when performing an operation wherethe cutting tool may contact hidden wiring orits own cord. Contact with a "live" wire will makeexposed metal parts of the tool "live" and shockthe operator.4. Wear a hard hat (safety helmet), safety glassesand/or face shield. Ordinary eye or sunglasses are NOT safety glasses. It is alsohighly recommended that you wear a dustmask and thickly padded gloves.5. Be sure the bit is secured in place beforeoperation.6. Under normal operation, the tool is designedto produce vibration. The screws can comeloose easily, causing a breakdown or accident.Check tightness of screws carefully beforeoperation.7. In cold weather or when the tool has not beenused for a long time, let the tool warm up for awhile by operating it under no load. This willloosen up the lubrication. Without properwarm-up, hammering operation is difficult.8. Always be sure you have a firm footing.Be sure no one is below when using the tool in

/ 48

Related manuals for Makita HR4501C

Makita HR4501C Instruction Manual

This manual is suitable for:

HR4501C HR4510C HR4511C

manualsdatabase

Your AI-powered manual search engine