Makita JR103DWAE Instruction Manual

Also see for JR103D: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

8 ENGLISH123 4► 1. Recipro saw blade 2. Hex wrench 3. Hole forrecipro saw blade 4. Blade clampTo install the recipro/jig saw blade, loosen the bolt byhex wrench. When installing a recipro saw blade, pressthe bolt with the hex wrench to open the slot duringinserting the blade.1234► 1. Recipro/jig saw blade 2. Blade clamp 3. Hole forrecipro saw blade 4. Hole for jig saw bladeYou can use both jig saw blades (B type) and reciprosaw blades according to your work. Insert the recipro/jig saw blade straight into the blade clamp and tightenit by hex wrench. Pull the recipro/jig saw blade lightly tomake sure that the recipro/jig saw blade does not fall offduring operation.To remove the recipro/jig saw blade, follow the installa-tion procedure in reverse.Hex wrench storage12► 1. Hex wrench 2. ProtrusionWhen not in use, store the hex wrench as shown in thefigure to keep it from being lost.OPERATIONCAUTION: Always press the shoe firmlyagainst the workpiece during operation. If theshoe is removed or held away from the workpieceduring operation, strong vibration and/or twisting willbe produced, causing the blade to snap dangerously.CAUTION: Always wear gloves to protectyour hands from hot flying chips when cuttingmetal.CAUTION: Be sure to always wear suitableeye protection which conforms with currentnational standards.CAUTION: Always use a suitable coolant(cutting oil) when cutting metal. Failure to do so willcause premature blade wear.CAUTION: Do not quirk the blade duringcutting.

/ 10

Related manuals for Makita JR103D