Makita JV001G Instruction Manual

Also see for JV001G: Instruction manual Instruction manual Instruction manual Instruction manual Instruction manual

2 ENGLISHSPECIFICATIONSModel: JV001GLength of stroke 26 mmStrokes per minute 800 - 3,500 min -1Blade type B typeMax. cutting capacities Wood 135 mmMild steel 10 mmAluminum 20 mmOverall length (with BL4025) 283 mmRated voltage D.C. 36 V - 40 V maxNet weight 2.6 - 2.9 kg• Due to our continuing program of research and development, the specifications herein are subject to changewithout notice.• Specifications may differ from country to country.• The weight may differ depending on the attachment(s), including the battery cartridge. The lightest and heavi-est combinations, according to EPTA-Procedure 01/2014, are shown in the table.Applicable battery cartridge and chargerBattery cartridge BL4020 / BL4025 / BL4040Charger DC40RA / DC40RB / DC40RC• Some of the battery cartridges and chargers listed above may not be available depending on your region ofresidence.WARNING: Only use the battery cartridges and chargers listed above. Use of any other battery cartridgesand chargers may cause injury and/or fire.SymbolsThe followings show the symbols which may be usedfor the equipment. Be sure that you understand theirmeaning before use.Read instruction manual.Wear safety glasses.Ni-MHLi-ionOnly for EU countriesDue to the presence of hazardous com-ponents in the equipment, waste electricaland electronic equipment, accumulatorsand batteries may have a negative impacton the environment and human health.Do not dispose of electrical and electronicappliances or batteries with household waste!In accordance with the European Directiveon waste electrical and electronic equip-ment and on accumulators and batteriesand waste accumulators and batteries,as well as their adaptation to national law,waste electrical equipment, batteries andaccumulators should be stored separatelyand delivered to a separate collection pointfor municipal waste, operating in accor-dance with the regulations on environmen-tal protection.This is indicated by the symbol of thecrossed-out wheeled bin placed on theequipment.Intended useThe tool is intended for the sawing of wood, plastic andmetal materials.NoiseThe typical A-weighted noise level determined accord-ing to EN62841-2-11:Sound pressure level (LpA ) : 87 dB (A)Sound power level (LWA ) : 98 dB (A)Uncertainty (K) : 3 dB (A)NOTE: The declared noise emission value(s) has beenmeasured in accordance with a standard test methodand may be used for comparing one tool with another.NOTE: The declared noise emission value(s) mayalso be used in a preliminary assessment of exposure.WARNING: Wear ear protection.WARNING: The noise emission during actualuse of the power tool can differ from the declaredvalue(s) depending on the ways in which the tool isused especially what kind of workpiece is processed.WARNING: Be sure to identify safety mea-sures to protect the operator that are based on anestimation of exposure in the actual conditions ofuse (taking account of all parts of the operatingcycle such as the times when the tool is switchedoff and when it is running idle in addition to thetrigger time).